433mhz Universal Car E Control Key Smart Electric Garage Door Replacement Cloning Cloner Copy E-Red

1.Chs could be copied

2260(all manufacturers);2262(All manufacturers);PT2264, 5326(All manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918series,527(All manufacturers);1527(All manufacturers);2240(All manufacturers);HCS101, HCS200/HCS201(part code),HCS300/HCS301, part single ch microcomputer....

2.Code cleaning method:

Pre the unlo on and lo on at the same time(some shells are the up on and down on), after the LED indicator light fes three times, loosen any one of the ons while the other is kept preing, then push the released on three times, the LED indicator will enter into the fast fing status. At this time all the memory data is cleared, the cleaned e control will not have lighting LED indicator no matter which on you pre

3. Copy method

One hand keeps the e controller, while another keeps the copy e control, the two e controls should be placed as closely as poible (the ideal situation is to put the two e controls on the desktop side by side with zero distance), respectively pre down the copy on, when the LED indicator light fes quily after three fes, this copy is succeful, other key operating methods are the same. Some e control has a smaller transmitting power, so the e control should be placed ba to the copy e control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not succeful, it should recopy after clearing code

Paage included

1x e control (with battery)

Features

Multi-functional and multi-variable, personalized and user-friendly simple design and fast to use. This smart copy e control is suitable for electric door e control, telesco door e control, garage door e control. Clearing method: When the top two ons are preed at the same time, the LED indicator fes 3 times and then releases the right hand (do not release the left hand). Pre the right on continuously for three consecutive times with the right hand, and the indicator light fes. Then the pre any on the light still off.The clear function is completed. Copying: The corresponding on(you can decide which) of old e and the our e control is both preed,during which the light quily fes twice,and slowly fes 3 times then continuously light, then the two ons is copied. The following 3 ons copying is the same. Chs that can be copied: PT2262,PT2240, PT2264, PT2260,PT2242,SC2262, SC2260, EV1527,P527,HT600,HT640,HT12D,HT12F,HT12E,SC5262 etc.

Descrtion Material: Plastic. Size: 60*36*12mm. Color: As tures show. Type: Wirele e. For: Such as electric telesco door e control, road gate e control, alarm e control and so on. Rated voltage: 12V.Battery(included). Wirele transmiion distance: 20-30 (m).

Notes: Due to the light and resolutions setting difference, the item/'s color may be slightly different from the tures. Please allow slight dimension difference due to different manual measurement.

About shping
Shping and Pa All it will be double cheed and well paed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the paage to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedba, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at cheout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.Feedour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedba for the transaction.