433MHz Universal Wireless Remote Control AC 110V 220V 10Amp 2200W 4CH Relay Receiver Module RF Switch For Gate Garage Opener-1 Receiver 3

433MHz Universal Wirele Remote Control AC 110V 220V 10Amp 2200W 4CH Relay Receiver Module RF Switch for Gate Garage opener

*** Tips:If you need us to set up the operating mode , please leave a meage on the order  ***

Product Application Area

Remote controarage door \  Remote control house door \ Remote control Lamp \ Remote control curtains \ Remote controate and other remote control device

Package include Receiver module( include Shell )

Remote Control (include battery ) Product manual

Technical Data

Electronics Character:

Working Voltage:AC 85V~250V

Input Voltage:1V~250V

Output Voltage:1V~250V

Max current : 10Amp

max load: 2200W

Quiescent Current:5mA

Working Frequency:433Mhz

Receiving Sensitivity:-104dBm

Function option:Momentary/Tole/Latched

Modulation Mode:ASK

Matching Mode: Intelligent Learning code

Output Mode:Dry contact /Voltage output

Shell:Yes

Working temperature : -30~+80

PCB dimension:68.2x48.2(mm)

Pin functions:

+V :Positive pole input

GND :Negative pole input

Relay 1/2/3/4

1. Normal Closed of relay (NC)

2. Common of relay          (COM)

3. Normal Open of relay   (NO)

Products Display
Tips: All of our products are of high quty! If you have other needs, please feel free to purchase them in our store.

Click here to search more

Circuit Connection modes

Please Note: the Receiver Switch Module have 3 ways of working mode.The OUTPUT signal has 2 Voltage Level. It decided by the INPUT of the COM pin.

NOTES 1. Please do not charged operation, you should shut off the power, and operation ar testing and correct electricity. 2. Please promptly change battery when remote control voltage is insufficient,  (when the battery voltage is insufficient, generally get close transmitting ) 3. Please pay attention to avoid metal mask,large equipment ,strong interference electromagnetic filed when using wirele RF products,and avoid too short distance between the remote control and receiver board . 4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe .

Operating Mode

You can match the Remote Control with the Receiver Switch Module  in 3 modes.

Remote mode 1: Momentary Mode

Pre and hold on one on -> ON ; Release the on -> OFF

Details: Pre one on (on the remote control), the relay (on the receiver board) turn to switch-on ; Release the on, the relay turn to switch-off .

Remote mode 2: Tole Mode

Pre one on -> ON ; Pre the same on again -> OFF

Details: Pre one on (on the remote control) once, the relay (on the receiver board) turn to switch-on ; Pre the same on again, the relay turn to switch-off.

Remote mode 3: Latched Mode

Pre one on "A"-> ON ; Pre another on "B" -> OFF(another relay turn to switch-on)

Details: Pre one on "A"(on the remote control) once, one relay (on the receiver board) turn to switch-on ; Pre anotheron "B" once , the relay turn to switch-off(At the same time another relay turn to switch-on )

Set Up

- Part 1: Delete the existing data about remote mode

Note: When you receive our products, it maybe set in one remote mode ly, that because each product got test when it can be arranged to shipment.So, please delete the existing data about remote mode for the first application. Pre the learning on on the Receiver Switch Module board 8 times , the existing data are deleted succefully. Ar deleted the data, all the remote control cannot work any more.

- Part 2: Set up the Remote Mode

Remote mode 1: Momentary Mode

STEP 1

Pre and release the learning on on the Receiver Switch Module board once. Wait for a moment , the LED will turn off , indicating you entered the learning state.

STEP 2

Pre and release one on on the Remote Control , the LED on the receiver board will flash on then off indicating the on was learned. Wait 3 seconds, the LED will turn on again, indicating system is ready for use. Remote mode 2 : Tole Mode

STEP 1

Pre and release the learning on on the Receiver Switch Module board twice. Wait for a moment , the LED will turn off , indicating you entered the learning state.

STEP 2

Pre and release one on on the Remote Control , the LED on the receiver board will flash on then turn off , indicating the on was learned. Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use.

Remote mode 3 : Latched Mode

STEP 1

Pre and release the learning on on the Receiver Switch Module board triple. Wait for a moment , the LED will turn off , indicating you entered the learning state.

STEP 2

Pre and release one on on the Remote Control , the on-board LED indicator will flash 5 times to inform that the setting of latched mode succeful . Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use. On this products details page, there is a demonstration video available. *If you do not understand clearly. Please send us a meage to let us know. We will do our best to service each of our customers. Enjoy your shopping!*

About shipping

Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 




Special Announcement:

Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .




Your 100% satisfaction is very ant to us

If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.