433MHz Wireless Universal Remote Control DC 12V 24V 8CH rf Relay Receiver&500 meters remote control for Wireless Remote Control

Please note ：If you don't understand the product set， please go to the following product video links:https://www.aliexpre.com/item/4001118557354.html?spm=2114.12010615.8148356.11.26cf4dd3LKUFd4

Receiver

Decode: Learning Code

Control Type: Tole, Momentary, Latched

Power Supply (Operating Voltage): DC12V 24V

Relay: 10A 250VAC 10A 125VAC 10A 30VDC 10A28VDC

Work Voltage Range of Relay: DC 0-28V

State current: ≤6 mA

Sensitivity:-105 dBm

Operating Temperature:-40‘C - 80’C

Size:87 X 77 X 26 mm

nsmitter

: 8 CH

Remote Control Distance:10-500 M  ( Ideal Distance without any block and signal interfere , it would rise and fall about 10%-90% with the block and signal interference.)

Encode: PT2262

Frequency:433 MHz

Size:102mm x 39mm x 13mm

Power Supply: 1 X 12V/23A Battery

3.Function ( Setting is  Momentary , Change it by yours.)

1).Tole/S-lock :Pre 1 on==>on,pre the same on again==>off

2) Momentary/Jog:Pre and hold==> on, release==>off

3)Latched/inter-lock:pre 1 on ==>on,pre other on==>off

4.Clear Code and Learn Code

1) Learn

pre the learning on 1 time,the learning LED turns on,then pre the nsmitter key to learn.the learning led fs and turns off. means learn sucefully.

2) Clear

pre the learning on for 5 seconds,the learning LED fs and turns off, that means the code has been cleared.

nsmitting Distance: 20-500m(please notice that is the ideal distance without any block and signal interfere , it would rise and fall about 10%-90% with the block and signal interference ).

pacote inclued:

A:

1 x nsmitter(with battery)B:1 x Receiver(with cover)１ x nsmitter(with battery)C:1x Receiver(with cover)２x nsmitter(with battery)D:1x Receiver(with cover)３x nsmitter(with battery)Ｅ:1x Receiver(with cover)４x nsmitter(with battery)