5pcs 433.92Mhz Universal Wireless DC 3.6V-24V E Control Switch 1 CH RF Relay Receiver LED Light Controller DIY Kit-10 PCS

Application environment:

e control switch,motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, e control soet, e control LED, e audio e control electric doors, garage door e control, e control retractable doors, e volume gate, pan doors, e control door opener, door closing device control system, e control curtains, alarm host, alarm, e control motorcycle e control electric cars, e control MP3.

Specifications Of The Receiver:

Model Number:QA-R-011 (QA-R-012) Working Voltage: DC 3.6V~24V. Maximum Load: 2A. Static Current: 3.6 mA ~ 5.5mA. Working Frequency: 433MHz. Reception Sensitivity: ≥ -107dBm. Modulation Mode:ASK (superheterodyne). Number Of Stored e Controls: ≤ 10. Working Mode: Momentary, Toggle, Latching Mode. Learning Style: Learning on. Working Temperature: -20 degrees 80 degrees. Appearance Size: 26mmx 13mm x 1mm (length × width × high).

Paage List:

5pcs*Receiver Module

Clear Code:

Pre the learning on on the module 8 times continuously, and the light fes seven times and then goes out.

About Working mode:

Momentary: Pre the e on, the relay connects, release the e on, the relay disconnects. Toggle: Pre once the e on, the relay connects, pre the e on twice, the relay disconnects. Latching: Pre the e on A, the relay connects, pre the e on B, the relay disconnect.

Learning the Code:(Momentary)

Pre the learning key on the receiver once time, it comes into momentary setting mode. Wait for a moment, the LED will be off , it comes into learning state. Push the e on, LED indicator on the receiver board will f then come off. After 3 seconds, the LED indicator will be on again, learning succefully.

Learning the Code: (Toggle)

Pre the learning key on the receiver twice time, it comes into toggle setting mode. Wait for a moment, the LED will be off , it comes into learning state. Pre the e on, LED indicator on the receiver board will f then come off. After 3 seconds, the LED indicator will be on again, learning succefully.

Learning the Code:( Latching)

Note: When you choose for latching mode, in order to learn more e control, you need to learn two different on, the first time learning is for ON, the second time learning for OFF. For example: on A = ON, on B = OFF Pre the learning key on the receiver trle time, it comes into latching mode . Wait for a moment, the LED indicator on the receiver board will f then come off. Pre the e on A. LED f for 5 times. Pre the e on B. LED f for 5 times After 3 seconds, the LED indicator will be on again, learning succefully. A = ON, B = OFF.

About shping
Shping and Pa All it will be double cheed and well paed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the paage to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedba, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at cheout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.Feedour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedba for the transaction.