6 In 1 AC 80V-260V 5A 10A 100A Digital Voltage Current Power Energy Frequency Power Factor Meter

1. Seiko details are outstanding

2.Large blue film LCD screen with full viewing angle, 360 degrees without dead angle

3. The full-screen parameter display in Chinese and English is simple and clear to choose according to needs

4. The installation is firmer and more durable: the three-point buckle design of reinforced nylon material is full of elasticity and the card will not break

5. The material is delicate and comfortable to the touch

6. Backlight control: the backlight can be turned on or off by short preing the on, and the backlight state will be automatically saved after power fai

Features:

1. Backlight control:

The backlight can be turned on or off by short preing the on, and the backlight state will be automatically saved after power fai.

2. Reset the battery:

Step 1: Pre and hold the on for 5 seconds until the energy number fes, then release the on;

Step 2: If you short pre the on again, the power data will be cleared and exit the reset fing state; Step 3: If there is no on action within 5 seconds, it means that the power data is not cleared and exit the reset state.

3. Power alarm value setting:

Step 1: Long pre the on for 3 seconds until the screen displays "SET CLr" and then release the on to enter the power alarm value setting state;

Step 2: The power area displays the current power alarm value and the lowest digit starts to f. At this time, you can pre the on to +1 the digit. When there is no on operation for more than 3 seconds, the digit will be switched automatically. The setting method is the same as above;

Step 3: After the setting is completed, pre and hold the on for more than 5 seconds to automatically save and exit, the active power threshold setting range is 0.0~22kW

PZEM-018 5A:

Product specifications:

Product model: PZEM-018 5A

Optional version: Chinese/English

1. Power:

Working voltage: 80~260VAC

Test range 0~1100W, starting power 0.2W