6 in 1 meter Level Water Temp Oil Pressure 0~10Bar r Alarm For Car Boat Motorcycle Meter

Dimensions :

- 85mm diameter (3-3/8’’)- 55mm Depth (2-3/4’’)

Features :

- SOG: Speed Over Ground: 0-600km/h- ODO: : 0-999999km- TR: 0-999.9km(can be adjusted by the baon.)(Return Zero When off electricity)- COG: Course Over Ground

Specification:

➽ Level: 0-100%(Pre the baon to adjust thelevel signal: 0-190Ω/240-33Ω available.)➽Water Temperature: 40-120℃/100-250℉(Temperature r: 301-22)※ the water temperature is displayed by default.If you need oil temperature,please contact us to customize.➽ Oil Preure: 0-10 bar/0-145psi(Preure r: 10-184)(Ar power on, pre the baon to adjust unit, if the oil preure unit is "psi", the temperature unit will be "℉".)➽: 9-32V➽ Total Engine Hours: 0.0-99999.9H(Pre the baon to adjust.)➽: 0-9999RPMSpeed Ratio: 1.0-360.0; Step Value: 0.1

Package Included

- 1*6 in1 Multifunction - 1*Multi-plug socket- 1* - 1*Instruction

Function:

1.the degree of protection is 67.

2. With TFT Screen, can display the range clearly

3.r Fault Alarm(Chinese and English can be switched)

Connection

1.Bla: Ground(-)2.Red : 9-30VDC3.Blue : RPM Signal4.Yellow : Temperature Signal5. : Oil Preure Signal6. Level Signal

Setting:

1.Ar power on, touch the on, we can switch the unit: km/h, mph, knots, and save automatically.2.Keep on preing the rubber on of the backside for 3 seconds, and then enter into setting mode, if leave onMore than 3 seconds, it will be out of setting mode. The value will increase when you pre the on. When you leave the on and then pre it again, the value will decrease. The minimum step value is 0.1 and the adjustable range Is 1~360.When you get the required speed ratio value ar adjustment, please leave the on. The s will auto save your setup ar 3 seconds. If the setup doesn't meet your demand, please re-setup.3. Pre the on first, then power on, and then enter the selection mode, pre the on once to select the0-190 (European) level r or 240-33 (American) level r,pre the on twice to select the temperature unit and preure unit. (℉ and Psi ) or( ℃ and Bar) and the meter save automatically.4, Quitouch the on for 5 times, and then enter the engine hours setting mode, when you pre the on theEngine hours will increase, when you leave the on and then pre it again, the engine hours will decrease, when you get the required value ar adjustment, please leave the on, and the meter will auto save your setup ar 3 seconds.5. Then quitouch the on for 5 times again, and then enter into the OD0 setting mode, when you pre the onthe OD0 will increase, when you leave the on and then pre it again, the ODO will decrease, when you get the required value ar adjustment, please leave the on, and the meter will auto save your setup ar 3 seconds.