600W 10A DC-DC Step Up Boost Converter Module 12V 24V 36V 48V Power Supply Transformer 10V-60V To 12V-60V Voltage Regulator

600W 10A DC-DC Step Up Boost Converter Module 12V 24V 36V 48V Power Supply Transformer 10V-60V to 12V-60V Voltage Regulator

Descrtion:

Module name: 600W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: DC10V-60V Input current: 10 (MAX) Static operating current: 10mA (12V liters 20V, the higher the output voltage will be too much static too much) Output voltage: 12-60V continuously adjustable (default output 19V shping, for other voltage please note to the treasurer.) Output current: 10A MAX more than 6A please strengthen the heat (with the input and output preure, the greater the difference in output current smaller) Constant current range: 0.2-10A Output power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W, Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: 92% -96% (efficiency and input, output voltage, current, preure related) Input re connection protection: no (note positive and negative do not re) Installation: 4 3mm screw holes Wiring method: wiring output Module size: length 85mm wide and 52mm high 21mm Module weight: 80 grams First, the output voltage regulation:

1, adjust the CV-ADJ potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Clockwise voltage is small, counterclockwise adjustable First, the output current regulation:

2, clockwise CC-ADJ potentiometer about 20 laps, the output current is set to a minimum, connected to the LED, CC-ADJ potentiometer to the required current. For battery charging, put the battery after the end of the power, then receive the output, adjust the CC-ADJ to the current you need, (for charging must be used when the battery is fully charged, because the battery left The more charge, the smaller the charge current. Note:

Please do not use the short circuit to adjust the current, the boost module circuit structure can not be short-circuit way to tune. Package:

1 X 600W boost constant current module

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.