60A 12V24V USB Solar Energy Controller Charge Regulator

Features:

1. Solar charge controller comes with a big LCD display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration.
2. Solar panels are suitable for solar systems, solar street lamps, smart homes, solar light boxes, intelligent irrigation, camping lantern, etc.
3. The solar regulator is suitable for three kinds of batteries rechargeable Lead-acid batteries, Ternary batteries, and Iron phosphate batteries.
4. Built-in Multiple Protection: Overcurrent protection, short circuit protection, Undervoltage protection, reverse connection protection, temperature compensation, and overvoltage protection, are safer for use and suitable for home, industrial, commercial, etc.
5. SOC Intelligent Control: Intelligent optimization SOC control is realized based on an expert controller system.
6. Dual USB output interface: Digital port is compatible with all kinds of digital USB interfaces in the market.

• System connection
  
  1, Connect the positive and negative poles of the battery to the controller, which will automatically detect the battery voltage.
  
  2, Connect the positive and negative poles of the load to the controller. Be careful not to connect the positive and negative poles in reverse.
  
  3, Connect the solar panel to the controller.
• Charge cut-off voltage  (the voltage is only for the corresponding 12V system, if a 24V system is used, multiply by 2):
  
  Lead-acid battery: default value is 14.4 V (non-adjustable)
  
  Ternary battery: default value 12.6 V (non-adjustable)
  
  Iron phosphate carp battery: default value is 14.6 V (non-adjustable)
• Discharge recovery voltage (the voltage is only for the corresponding 12V system, if a 24V system is used, multiply by 2):
  
  Lead-acid battery: default value 12.6 V (adjustable 11.5 V ~ 13V)
  
  Ternary carp battery: default value 10.5 V (adjustable 10V ~ 11V)
  
  Iron phosphate battery: default value 12.0 V (adjustable 11.5 V ~ 12.5 V)
• Discharge cut-off voltage (the voltage is only for the corresponding 12V system, if a 24V system is used, multiply by 2):
  
  Lead-acid battery: default value 10.7 V (adjustable 9.5 V ~ 11.5 V)
  
  Ternary carp battery: default value is 9.0 V (adjustable 8.5 V ~ 9.5 V)
  
  Iron phosphate carp battery: default value 10.0 V (adjustable 9.5 V ~ 10.5 V)
• Floating charge voltage  (the voltage is only for the corresponding 12V system, if a 24V system is used, multiply by 2):
  
  Lead-acid battery: default value 13.7 V (adjustable 13V ~ 15V)
  
  Ternary battery: default value 12.0 V (adjustable 11.5 V ~ 12.5 V)
  
  Iron phosphate battery: default value 13.8 V (adjustable 13V ~ 14.5 V)