60W 9.99A 30V DC Electronic Load Lithium Battery s Capacity Monitor Discharge Charge Power Supply Meter 9.99A Board

New upgrade features:
1. The testing current range has been changed from 0.20-9.99A to 0.10-9.99A.
2. The lower limit and termination voltage range have been changed from 1.0-25.0V to 0.9-28.0V.
3. Support non operational voltage display.
4. Increase support for four wire testing in electronic load mode, with independent four wire voltage indicator lights.
5. The LED indicator set di is changed to the current set di fing indicator.
6. For DIY players, it is supported to modify power within the range of 60-250W

Working power supply: DC12V stable voltage 11-13V not less than 0.5A Interface: 5.5 * 2.1 round mouth inner positive pole
Working mode: Single mode constant current CC
Discharge current: 0.10-9.99A in steps of 0.1A or 0.01A
Discharge current error not exceeding 0.7% plus or minus 0.01A
Capacity testing error shall not exceed: 0.5A 2%, 2A 1.5%, 5A and above 1.2%
Offline termination voltage setting range: 0.9-28.0V Step by step 1V or 0.1V
Discharge voltage: 0.90-30.00V affected by MOS internal resistance and other losses, the measured input 1V can support a current of 6-7A, and the measured voltage needs to be greater than 1.3V at 9.99A
Voltage measurement error does not exceed: 0.8%+-0.02V

Power: 62W and 112W. Overpower automatically limits current for example, for 60W, 9.99A can be opened at 6V, but only 3.00A can be opened at 20V
Battery test statistics limit: 999.9Ah or 9999Wh, stop testing when the value is reached whichever comes first
Circuit board size: 60W 112mm * 70mm * 57mm the fan protrudes approximately 12mm from the board
110W 122mm * 70mm * 77mm the fan protrudes approximately 22mm from the board
Location of positioning hole: 60mm * 88mm, hole diameter 3.2mm, 5mm cushion column installed 60W for copper column and 110W for insulated nylon column
Weight: approximately 170g 60W
Approximately 270g 110W
Fan control: Smart fan control the fan can automatically change speed infinitely according to the temperature of the radiator
Protection functions: overheat protection "otP", instantaneous overpower protection "oPP", overvoltage protection "ouP", re connection protection, and power supply voltage abnormality protection.