80W LCD Digital Iron Kit Set with Switch on Temperature Ddjustable Welding Tool Accessories for Home DIY/Repair

80W LCD Digital Iron Kit Set with Switch on Temperature Ddjustable Welding Tool Acceories for Home DIY/Repair Specifications: Product Name: Electric Iron with switch on Iron Length: about 2.5in/6.5cm Cable Length: About 57in/145cm Working voltage: US 110V / EU 220V /CN 220V/UK 220V Power: About 80W Warm-up time: 10-20 seconds Preheating temperature: About 180℃-520℃ Iron tips: Use 900 series iron tip, plug-in heating core Alarm: EA0 heating element open circuit Features: 1. Enhanced ceramic heater takes only 10 seconds to preheat 2. Adjustable temperature, minimum 180 degrees, maximum 520 degrees 3. The whole body of the product can be disaembled and replaced easily 4.Had an "on/off" switch C/F conversion: Pre the + and-keys at the same time without turning on the machine, and don't let go. Turn on the power at this time, release the two ons after seeing the LCD display, and then enter the setting menu, C or F is displayed at this time. Pre + key to select C/F, pre two keys at the same time to exit the setting. In the setting state, stop heating, and start heating after exiting. Set temperature operation: 1: Pre the + key once to increase the temperature by 5 degrees, long pre + the temperature to increase continuously. 2: Pre once to decrease the temperature by 5 degrees, long pre the temperature to decrease continuously. 3: When there is no key for 3 seconds, the newly set temperature will be memorized, and the temperature will be kept at the next startup. 4: When the heating core reaches the set temperature about 30~50S, the temperature of the iron tcan reach the set value. Calibration operation: (Generally choose 320 degree calibration.) 1: Put the iron ton the after powering on for 90S, and add solder to the iron tto make the iron tfully contact the thermocouple. 2: Wait 2~4s after the shows that the temperature is stable, and then record the temperature of the . 3: Remove the iron of the and pre + and-at the same time to enter the temperature calibration interface. 4: Input adjustment amount For example: set the temperature to 290C, the measured temperature is 282, and then pre the LCD to display 08C, Set the temperature to 290C and the measured temperature is 300. Then pre the LCD display to -10C, 5: Pre + and-at t he same time to exit the temperature calibration interface. Blaset 1 guy *1 Iron tips *5 Blaset 2 guy *1 Iron tips *5 Cleaning sponge*1 Blaset 2-1 guy *1 Cleaning sponge*1 Stand*1 Blaset 3 guy *1 Cleaning sponge*1 Stand*1 Iron tips *5 Blaset 4 guy *1 Cleaning sponge*1 Stand*1 Iron tips *5 Tin sucker*1 Blaset 4 guy *1 Cleaning sponge*1 Stand*1 Iron tips *5 Tin sucker*1 Solder wire 30g*1 Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.