85mm 0~12000 RPM LCD Hour Meter Universal for Car Motorcycle Marine

Features:

-Be suitable for motorcycle marine boats,truck, excavator, ctor ect.- using ster motor drive pointer, accurate display of the engine RPM, and with the LCD display clear display hour.- The LCD display clear display hour, with instructions of high precision, repeatability and versatility, reliability and stability, drive And control is relatively simple and so on.-316 Stainle steel bezel with curved gla.-Convenient Installation by multi-plug socket connecting way.-Total Hourmeter can be adjusteed-Overspeed alarm threshold value can be adjusted.

Technical Data:

-Fixing dimension: 85mm-Working Voltage: 12/24V-Indicating Range: 0-12000RPM-Backlight: Red or Yellow available-Operation mode: LCD display, ster motor-Operating temperature:-40℃-85℃

Function Select (, Hour, Buzz)

Pre and hold on the on at the back, then turn on the power supply.The LCD will show , HOUR, BUZZ, etc.You can select the function to be set after release on.1.“” (change RPM Ratio)After selecting “”, the LCD will show for example “P 3” (3 means 3s per round) after 3 seconds. Pre the on to change the fing di in the LCDYou can select “” again to confirm the setting is done.How to confirm RPM Ratio?a. If your r is installed on the flying wheel panel, the RPM ratio is equal to the number of gears of the engine.b. If the speed signal takes from W-Terminal, the RPM ratio is equal to the half of the number of poles.2.“HOUR”(change total hour meter)After selecting “HOUR”, the LCD will show for example “5000” (5000 HOUR) , pre the on tochange the fing di from 0 to 99999 to set the target value.3.“BUZZ”(change overspeed alarm threshold value)After selecting “BUZZ”, the LCD will show for example “B 3000” ( will be on when speed over 3000RPM), pre the on to change the fing di from 0 to 8000 to set target overs RPM alarm threshold value.

Package Includes:

1x 1x Multi-plug socket1x Installation Instruction