85mm Clical meter 35MPH 60MPH 80MPH 160MPH With Turning Light For Car Marine Boat 12V 24V

Specification :

-Fixing dimension: 85mm(3-3/8")-Indicating Range: 0-200km/h 0-150MPH-Working Voltage: 12V/24V-Mileage Range: 0-999999 km miles- Blind Area Compensation-OverSpeed Alarm (Value can setting )-Indication light: LEFT, HIGH BEAM, RIGHT-Backlight: Red and Yellow available-Working temperatures: - 40 to 85°C-Operation mode: LCD display, ster motor-Application :Car Boat Motorcycle Marine

Installation:

1. Cut an 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16”) behind the panel to fit the .2. Remove fastening ring (I), insert through the panel from the front. Tighten (III) using fastening ring (I) from the rear.3. Connect cables according to the diagram. Choose either red or yellow wire for backlighting.4. Securely fasten the , preferably outdoors (or inside front windscreen) so that it has a clear view of the sky to piup signal. Connect the cable to socket in the baof the . Do not cut cable.5. Ar turning on the power, allow the to search for signal for 1 minute.Note: Ar setting, you should disconnect both Power+ and GND, then reconnect the two cables , it will save the setting. If you just cut Power +, then it won’t work properly.

Package includes:

1x meter1x 1x Multi-plug socket1x Installation Instruction