85mm r 6K for Car Boat oline Engine Tach RPM Signal Adapter

Feature :

- Waterproof:IP 67- Excellent anti-foing function;- With curved gla( with anti-fog function).- 316 Stainle steel bezel with curved gla;- Convenient Installation by multi-plug socket connecting way;- ( red,yellow,orange,green,blue,purple,white ), customers can adjust that you like- fit for Car /Truck/ Boat /Diesel Engine /oline Engine

Specification:

- Size:85mm- Signal : - Working voltage: 9-32VDC- Working current: ＜120mA- Backlight :7 Color backlight- Engine hours: 0.0-99999.9H- Working temperature: -30-70℃- Storage temperature: -40-85℃- Waterproof and dustproof grade IP67.

Indicating Range:

0~6000 RPM

Package Included: (as the picture shows)

1x AdapterOR1x OR1x + AdapterNote: This does not include Adapter. The Adapter need to be purchased additionally. Thank you for your understanding~

Whole and drop shipping are both welcomed

For whole, we will offer the discount or free expre shipping which only takes 3-7 days to arrive.For drop shipping, We could send the goods to your customers directly and won't leave information about us if youd like to.

Note: This does not include Adapter . The Adapter need to be purchased additionally. Thank you for your understanding~

Model: GR01 Suitable for oline engine

1.Cable DefinitionRED: Power Supply 12V DCBLACK: Power GNDBLACK/BROWN (1.6m): Input Signal CableBLUE: Output Signal (fixed 4s/round rpm ratio)BROWN: Switch Control Cable2.Configure Steps:1)Connect Switch Cable to enter in setting mode2)Find the Ignition of your oline Engine, normally it’s close to Spark Plug, which can be easily found from your engine/car/vehicle user guide.Wrap the input signal cable 5~8 round acro the ignition cable, and then tighten like below:3)Power on the r, the LED will stay Green4)Disconnect Switch Cable, the LED will still stay Green and calate the detected from engine5)Connect Switch Brown Cable and Disconnect again, the LED will f6)The r output signal with fixed Tach RPM ratio 4pulese/round, which means it will output 66.6Hz when 1000RPM.For example, if the input frequency is 100Hz @1000RPM, the r will convert the signal and then output 66.6Hz @1000RPM7)How to configure ?Please set your /RPM tach RPM ratio to 4 s/round, then the will work properly.

Model: DR01 Suitable for diesel engine

1.Cable DefinitionRED: Power Supply 12V DCBLACK: Power GNDYELLOW: Output Signal (fixed 4s/round rpm ratio)WHITE: Switch Control Cable2.Configure Steps:1)Connect Switch Cable to enter in setting mode2)Find the vehicle Alternator, and then mount the DR01 on top of the alternator like below, and fasten the installation:3)Power on the r, the LED will stay Green4)Disconnect Switch Cable, the LED will still stay Green and calate the detected from engine5)Connect Switch Brown Cable and Disconnect again, the LED will f6)The r output signal with fixed Tach RPM ratio 4pulese/round, which means it will output 66.6Hz when 1000RPM.For example, if the input frequency is 100Hz @1000RPM, the r will convert the signal and then output 66.6Hz @1000RPM7)How to configure ?Please set your /RPM tach RPM ratio to 4 s/round, then the will work properly.