A Boat Car Marine 52MM Gauge with Alarm Light for Stainless Steel Fuel Level Sensor 0-190Ohm

Gauge Specification:
1. Working voltage: 9-35V;
2. Test range: 0-100%;
3. When the Fuel Level is ≤ 10%, the Gauge will flash for alarm;
4. Resistance value odaptive sensor: 0-190 Ω;
5. The RED wire is connected to the positive pole of the power supply, the BLACK wire is connected to the negative pole of the power supply, and the GREEN wire is connected to the sensor.
Package Include:
1X 52MM Fuel Level Gauge
Feature:
- Accurately measure the oil level. Get an accurate view of your fuel level conditions.Safely protect your engine.
- Self-calibration at start-up ensures the meter operates optimally, smart and effortlessly.
- LED digital display, real-time measurement of oil level. Numbers and percentages show the amount of oil. Even at night, you can directly understand the oil level.
- Lightweight, with necessary wires for installation, no need for other sensors, plug and play, easy to install.
- Widely used car, truck, yacht, Boat and marine ect.
Fuel Level Sensor Specification:
- Resolution range: 21 mm
- Signal: 0-190ohm
- Working volt:9-32VDC
- Operating current: ≤60mA
- Operating temperature: -30~+75℃
- Storage temperature: -40~+85℃
- Sensor Height: Approx. 350mm / 13.8 inch
- Sensor Length: 125MM/150MM/200MM/250MM/300MM/350MM/400MM/575MM
-Assembly: 5 holes
-Mounting: 5 pieces of M5 screws and 2 mm thick gasket
-Protection rank: IP67
-Level Sensor Support : Water Level Gauge and Water Level Gauge
Attention:
- Empty oil level : 0 ohm / 240 ohm
- Full oil level : 190 ohm / 33 ohm
- When the oil / water level is empty , there will be a space of 3-21mm between the sensor at and the bottom of the sensor. This is a safe distance, and the sensor can work normally,Thank you~
- When the oil / water level is full, there will be a space of 3-15mm between the sensor at and the top of the sensor. This is a safe distance, and the sensor can work normally, Thank you~
Package Includes:
1 x Sensor
1 x Gasket
5 x Screws