AC 220V DC 24V 12V Tostat Digital Temperature Controller

Features: The product has a total of four ons, on plus, on minus, SET (setting on), reset on. There are two sets of digital tubes showing the actual temperature and the set temperature respectively. All parameters are automatically remembered after 5 seconds of setting. Operation use: Red digital tube: actual temperature Blue digital tube: set temperature on plus: Increase the set temperature on minus: Decrease the setting temperature Restore factory settings: Pre and hold the on plus on for more than 5s at the same time, the system will restore the settings data. Set on (SET): 1. Short pre SET, set the temperature to add 50 °C each time, the user can quickly pre SET to quickly set to the vicinity of the preset temperature value, and then fine-tune to the preset temperature by preing the on. 2. Pre and hold SET to enter the parameter setting options. There are several parameters of P00~P05 for the user to set. After entering the parameter interface, pre SET shortly to switch P00~P05. Under the corresponding parameters, the corresponding data is added or subtracted by preing the on, and the automatic memory data is returned to the display interface after the system is completed for 10 seconds. Code Cable: P00: H heating mode / C cooling mode P01: Temperature difference backlash (0~500°) P02: Temperature correction(-10~10°) P03: Maximum temperature alarm value (500°) P04: Minimum temperature alarm value (-60°) P05: Data lock (ON/OFF) Specification: Voltage: AC 220V; DC 5V; 12V; 24V Output: 10A relay Temperature control range: -60~500° Temperature accuracy: 1° Resolution: 0.1° Refresh rate: 0.5S Shell material: ABS Dimensions: 79x43x26mm/3.11x1.69x1.02inch Installation size: 74x39mm/2.91x1.54inch Cable length: 42cm Note: 1.Please allow 0-2mm error due to manual measurement. pls make sure you do not mind before you bid. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package included: 1 x Digital Temperature Controller 1 x K-type M6 Tocouple











About shipping

Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 




Special Announcement:

Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .




Your 100% satisfaction is very ant to us

If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.