AD620 Microvolt MV Voltage Amplifier Signal Instrumentation Module Board 3~12VDC Arrival

Descrtion:High Precision uV / mV Voltage Amplifier Small Signal Instrumentation Amplifier AD620 nsmitterUsing AD620 as the main amplifier, can amplify uV, mV voltage. 1.5-10000 , adjustable. High precision, low offset, better linearity. Adjustable zero to improve accuracy. Can be d for AC, DC signal amplification. Module , need to have a certain electronic basis, if no basis customers, please carefully purchase, shop to provide technical support.Product Highlights:1: wide supply voltage range, the AD620 amplification of this product can be amplified microvolts, millivolt, compared to L58 amplification accuracy, better linearity, the maximum voltage output range of ± 10V.2: range, up to 1000 ti2mes, only through a potentiometer can be adjusted.3: adjustable zero through the zero potentiometer to adjust the zero, improve accuracy, there will be no zero drift phenomenon to meet customer needs.4: a negative voltage output, the module s 7660A output negative voltage (-Vin), can be provided to the customer to drive other dual power load.5: mini type, the size of 32 * 22mm, evenly distributed around the four 3mm positioning holes, both sides of the port 2.54mm standard pitch pinhole.Product s:Input voltage: 3-12VDC. (Bulk purchase can be customized): 1.5-1000 times adjustable, zero adjustableSignal input voltage: 100uV - 300mVSignal output range: ± (Vin-2V)Negative voltage output: higher than -Vin. As the negative voltage output resistance problem, the actual output is higher than -Vin, the greater the load power, the greater the negative voltage drop.Offset voltage: 50μV.Input bias current: 1.0nA (max).Common mode rejection ratio: 100 dBOffset voltage drift: 0.6μV / ° (maximum).Stability: 2μV / month maximumSize: 32 * 22mmWeight: 4gPackage Included:1* Voltage Amplifier nsmitter