Al Household Infrared Fever Digital Baby Adult Non-contact Laser Body Temperature Ear

Accurate Measurement Easy to use

One second Measurement Convenient and fast

5 Color shells are optional High definition backlit LCD display

Two Temperatures mode remove the removable forehead cap can become ear

3 Colors backlit display screen

C / F temperature unit switching

12 groups of memory

60s automatic power off without operation

EASY AND QUICK --One on operation, C / F are easily and instantly switchable. 60s auto power off operation. MEMORY FUNCTION--Memory recall of the latest 12 measurement results for tracking of temperature changes. SAFE AND RELIABLE --Utilize newest infrared detection technology, accurate and reliable, compared with the traditional mercury , to avoid the harm of mercury absorbed by the body DUAL FUNCTION MODE --Ear and forehead temperature mode.The forehead measurement in just a swe (3 seconds), ear measurement in just a slight (1 second).The external influence of the forehead is greater, it is NORMAL to get 1-2 F (0.6-1.2 C) difference between an ear measurement versus a forehead measurement. This is NOT due to the inaccuracy of the .it is recommended to measure the ear temperature. THREE-COLOR BACKLIGHT AND FEVER ALARM --Green ( below 37.5 C/ 99.5 F),Yellow (37.6 C~38.0 C / 99.68 F~100.4 F), Red ( above 38.1 C/100.58 F). Automatic fever alarm when above 38 C / 100.5 F. Change mode --Automatically change the Forehead Model (EAR Model) when you install the cover (take off the cover)

1. Inset the battery, pre the Start on, all symbols appear on the display, 1 second later it appears the temperature measured last time, the sign "M" appears at the same time. 2. The sign "M" disappear, forehead/ear indicator appear, it meas the place you measured last time, then the temperature unit flickering, now is the measuring interface. 3. Test Forehead Temperature: Keep the cover on the device, pre the "measuring" on till a "Beep" sound from the speaker. Measuring program starts. Keeping device in position for one second after two "Beep" sounds, the temperature value will show on screen along with the Forehead model symbol. 4. During next 6 seconds when test result lasting on the screen, user can no longer make a measurement until a sound of "Beep" aural reminder. 5. Test Ear Temperature: Take off the cover, the model will change as the Ear Model automatically, with the subject's head upright, take hold of the outer part of the ear, gently pull back and upward to straighten the ear c, put the probe to ear c slowly till the body of device stay completely close to ear c. 6. No operation in 60 seconds, the device will record the last measuring data and auto power off. 7.Preing down the "Power" on for 3 seconds when the device in off state, the unit will be switch between C / F automatically 8.The r is extremely sensitive. Any dirt and/or oil will prevent an accurate measurement. Check and clean the r regularly. The surface should be reflective and gleaming. If it is dull and lackluster, please clean the r with a q-t cotton swabs (preferably soaked with ).

- 1 x Infrared - 1 x Retail Box - 1 x user manual

Q: Does it light up when you turn on? We have one now and use a lot during the night but can't tell if it's on or not to start reading A: The green backlight will come on when the takes a reading. Please note though that the red backlight will come on when the registers low or high readings. Q: Mine is keep showing l(deg) f...or h(deg) f ?? how do i fix it? A: You can try recalibrating - simply pre the F2 on until you see 888.8 on the screen. Q: How do you keep the ear probe clean if there are no probe covers? A: the does not come with any probe covers. In fact, having the cover will affect the accuracy of its readings. To clean, simply d a cotton swab in and swab the r. Please make sure that the r surface is reflective and gleaming after you have cleaned it. This is ant because any dirt and/or oil on the r will prevent an accurate reading. Make sure you wait 5-10 minutes for the to completely eate before using the again. Q: Does it measure in centigrade too? A: Dual Mode can measure temperatures in both Fahrenheit and Celsius. Following are the steps to help you change the unit of measurement: 1. When the is off, pre and hold the F2 on for about 6-9 seconds. The screen will display ---" with an "M" at the bottom right. 2. Keep on holding the on until you see the "--- C or F" temperature unit on the screen. 3. Let go of the F2 on. The "--- C or F" temperature unit will start blinking. 4. Pre the F2 on again within 5 seconds to change the temperature to the unit of your choice. Q: Does this store previous temperatures? A: The can store up to 20 temperature readings. To acce the readings stored in memory, simply do the following : - Pre and hold F2 on for about 3-6 seconds until you see "---"M on the LCD display screen - Pre the F2 on again and the screen will display the number "1" with the M signal to indicate the first recorded reading. The recorded temperature will be displayed. - To recall the next recorded reading, pre the F2 on again and the number "2" will the M signal will be displayed, indicating the second recorded reading. - Repeat to recall earlier recordings. Q: How do you calibrate this? A: Clinically calibrated for al use. Clinically tested and proven to be reliable and accurate when used in acconce to instructions. To fix a temperature that is reading incorrectly on a digital , all you need to do is pre the reset on. With many s, this is just a matter of holding down the power on for a few seconds, but you may have to check with your manual to make certain. Once you have done this, you can perform the test again and all readings should be correct. Q: What is the temperature range for this? A: The forehead temperature mode has a range of between 89.6F - 107.9 F while the ear temperature mode has a range of between 32 F - 212 F. Q: Does this alert for low body temperature, i.e. hypothermia? A: The will emit 3 short beeps with a red backlight for 3 seconds if the temperature falls below 89.6 F. Q: I am getting wildly different readings when taking my son's temperature via the forehead. What am I doing wrong? A: Before taking forehead temperature, please ensure that you remove dirt or hair from the forehead area. With the r/probe cover attached, position the at the center of the forehead, just above the eyebrow. Ensure that the is in contact with the forehead. Pre and release the F1 on. You will hear a beep and the reading will be displayed on the LCD screen. Please bear in mind too that when placed at different points on the forehead, the temperature readings at different points on the forehead will vary. Furthermore, when taking multle readings you need to make sure that you wait at least 10 seconds between every reading. The is really sensitive to small changes in temperature and very often repeated use with no pause in between readings will result in inaccurate readings due to heat caused by friction. Q: Should the forehead and ear reading be different? The ear reading shows at least a degree if not more higher than forehead A: If you have a baseline temperature for anyone when the are not running a temperature taken in your preferred method any method can be deemed accurate. the correlation of temperature results are as follows: The average normal oral temperature is 98.6 F (37 C). A rectal temperature is 0.5 F (0.3 C) to 1 F (0.6 C) higher than an oral temperature. An ear (tympanic) temperature is 0.5 F (0.3 C) to 1 F (0.6 C) higher than an oral temperature. An armpit (axillary) temperature is usually 0.5 F (0.3 C) to 1 F (0.6 C) lower than an oral temperature. A forehead (temporal) scanner is usually 0.5 F (0.3 C) to 1 F (0.6 C) lower than an oral temperature.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.