Animal ID Reader 134.2KHz ISO11784 85 FDX B EMID Handheld Pet Tag Chip Scanner USB Charging Built in Buzzer
- I am an international seller
Our shop sells the most popular 3C consumer electronics products,such as mobile phone accessories,computer accessories,game peripherals,smart wearables,and follow the most popular fashion trends. If you like our products,please follow us,become our follower and fan.We will provide you with the most popular products to satisfy your fashion shopping experience.Type : ID : Mainland ChinaCertification : CE
FeaturesWorking Range: This portable animal ID reader supports ISO11784 85 FDX‑B ID64 microchip, with a working frequency of 134.2KHz, a reading distance of 15cm.Save and Display: Up to 128 labels can be saved, the information can be uploaded to the computer via USB cable, and the organic LED display screen is clear and intuitive.Battery Powered: This animal chip scanner has built in 3.7V rechargeable lithium battery, with 800mAh large capacity, USB 2.0 interface, can be fully charged in 90 minutes.Applicable Fields: This scanner is widely used in small animal management, resource management, railway inspection, husbandry, tree management, animal hospital, etc.Convenient Use: The animal ID reader has side non slip function, supports single hand holding, has the advantages of simple , sensitive response and strong practicability.SpecificationItem Type: Animal ScannerMaterial: ABSWorking Frequency: 134.2KHzData Storage: Stores 128 sets of dataCharging Method: USBCharging Voltage: 5VScreen Display: Organic LED DisplayContinuous Working Time: 4 HoursReading Standard: ISO11784 85 FDX B and EMIDBuzzer: Built inOperating Language: EnglishPower Supply: 3.7V Rechargeable Lithium Battery 800mAh (built in battery), fully charged in 90 minutesReading Distance: Approx. 15cm / 5.9inHow to Use1. Power on and Card Reading:Press the on to power on and enter the scanning tag interface.2. Scanning Tag:Scanning FDX‑B and EMID tag within the sensing area. If no tag is found, it will prompt No Tag Found.3. Charging and Data Upload:After connecting the USB cable, the USB symbol will appear in the upper left corner of the LCD screen, indicating the charging status. Press and hold the on for 3 seconds to upload the data stored in the device, up to 128 sets of data. After successful data upload, the interface will display as follows. Alternatively, you can connect the USB cable to upload real time data scanned by the device.4. Auto Power Off:The device will automatically power off after 120 seconds of inactivity.Package List1 x Animal Scanner1 x Data Cable