Appty To ANYCUBIC Photon S 3D Printer 2K LCD Screen With Gl 5.5 inch LS055R1SX03 2K Light Curing Display Screen No Backlight

The 2KLCD Screen without backlight

※Prompt：Due to the profeional acceories, individual rs may not be able to rep them by thees. Please go to the store for profeional maintenance ar receiving them. If you operate improperly and ca product damage, you need to bear the responsibility by yours.

★ModuleDimension:70.94(W)mm*128.26(H)mm*1.35(t)mm(Excluding I/F -FPC and electronic components)

★Active Area Dimensions:68.04(W)mm*120.96(H)mm(5.46”)

★Pixel Pitch:0.04725(W)mm*0.04725(H)mm(538ppi)

★Resolution:1440*2560

★Color Pixel Arrangement:RGB Vertical Stre

★Display Mode:nsmiive Type,Normally Black Mode,In-Pe Switching Mode

★Number of Colors:16,777,216 Colors

★Backlight:Light Emitting (LED),14LEDs are 2 parallel,7 series connection

★Backlight current:20mA/LED(typ)

★Power Supply Voltage:AVDD=5.5+/-0.1V AVEE=-5.5+/-0.1 V

※Note:

Interface I/O Power supply:VDDI=1.8=/-0.1V

The same voltage as “H” level of a customer’s interface signal must be supplied to VVDI

Interface:MI_DSI Video mode(4-x2-port)

Method of Inversion:Column Inversion

Surface Treatment:HC-Polarizer(Hardne:3H)★ Applicable Models:as the ture shows

✔Nice spare part to repair your device, and e it work properly

✔Profeional installation is highly recommended

✔All products will be d before they are iued. We usually three layers of pack: foam paper + cardboard boxes + waterproof tape.

✔Please confirm the version you need before buying to avoid probl during .

✔We will send the parcels within 1- ar buyer's payment is verified by Aliexpre.

Note:Our company supports whole and retail purchases. If you need to purchase larger quantities and other sizes, please leave us a meage to ensure that you have inventory at the time of purchase. We will recommend a more suitable product for you. Please contact us if you have any questions. I wish you a happy shopping, friend！！