AT100M Pro Antenna Tuner 1.8Mhz30Mhz Automatic Manual

This product is not only an antenna tuner, but also a meter, and standing wavemeter, support to display standingwave value, forward , and reverse . Two modes of operation are supported: manual tuning and automatic tuning. Supports 13 parameter configurations, suitable for senior players' depth customization, such as automatic storage number, tuning speed, starting , starting standingwave, calibration, standingwave calibration, signal testing, relay testing, and other functions, customize your tuning system. No need for professional data cable, suitable for most radio stations and antennas in the market.



Features:

【Small and Portable】: This product is small in size, compact in appearance, strong and solid metal housing, but the weight is only 400g, with high portability.

【Antenna Tuner & Standing Wavemeter 2in1 Design】: This product is not only an antenna tuner, but also a meter, and standing wavemeter, support to display standingwave value, forward , and reverse . The meter mode supports a maximum display of 150W SSB/CW in an untuned state. Please calibrate the standingwave value of the equipment when using or replacing the radio for the first time.

【Powerful Tuning Ability】: Built-in large capacitors and inductance value combinations, greatly improve tuning success rate and reduce the trouble of repeated antenna feed adjustment. The maximum combined value of capacitor is up to 3869pF, and the maximum combined value of inductor is up to 17.21uH.

【Morse Code Exerciser】: This product has a 3.5mm headphone jack on the back panel and supports external single-paddle buttons, so you can easily practice Morse code in your spare time. No need to buy a separate Morse trainer, one device does it all.

【Manual Tuning and Automatic Tuning】: Two modes of operation are supported: manual tuning and automatic tuning. In automatic mode, if the standingwave exceeds the set value (default 1.80) while monitoring the radio signal, the lowest standingwave is automatically triggered. In manual mode, the capacitance or inductance values can be adjusted to very low standingwave ratios by manually increasing or decreasing the values after automatic tuning or directly.

【High Resistance】: The product uses wide signal wire, magnetic powderring, fine quality copper wire, rated resistance of 125W (SSB), and instantaneous peaking resistance of 120W (SSB mode). It can withstand different at different frequencies or in different modes, please refer to the manual for details.

【6 Kinds of State Interfaces】: Supports 6 status interfaces, including user storage interface, bar standingwave meter interface, large font interface, standingwave curve interface, curve interface, relay, and battery voltage status interface.

【Built-in Professional Settings】: Supports 13 parameter configurations, suitable for senior players' depth customization, such as automatic storage number, tuning speed, starting , starting standingwave, calibration, standingwave calibration, signal testing, relay testing, and other functions, customize your tuning system.

【Built-in Lithium Battery】: The use of a large capacity 3300mAh polymer lithium battery with an untuned standby time of up to 150-200 hours and a tuned average standby time of about 15 hours is very suitable for portable operation while supporting via the Type-C interface. The system interface displays the battery voltage and remaining in real-time, so you can use it outdoors without worrying about running out of . The number of relays operated at different tuning levels will affect the battery lifespan.

【Built-in 】: Built-in high- active , when the standingwave exceeds the set value of the automatic sound "drop -" ringing, timely reminds the user to pay attention to the current standingwave, and the product is hung on the tree antenna feed, the sound is still clear.

【Wide Applications】: Support various radio stations and antennas, no need for professional data cable, suitable for most radio stations and antennas in the market.



Attention:

1. Please fully read the product manual and precautions before using the equipment;

2. Before using its own tuning, be sure to adjust the radio to the lowest , prevents the damage to the radio or tuning;

3. When using or replacing the radio for the first time, it is necessary to recalibrate the standingwave value of the equipment. When the standingwave value displayed by the radio and the equipment is inconsistent, the radio shall prevail;

4. Please use the USB Type-C cable included with this product for ;

5. Keys are not included in the shipping list.



Specifications:

Name: Antenna Tuner

Material: plastics+metal

Battery: 1 * built-in 3300mAh battery (included)

Radio support capabilities: Supports most radio stations and antennas on the market

Frequency/: 1.8Mhz-18Mhz SSB/CW 0.1W-125W 1.8Mhz18Mhz Frequency Modulation/AM/FT8 0.1W-50W 18Mhz-30Mhz SSB/CW 0.1W-50W 18Mhız-30Mhz Frequency Modulation/AM/FT80.1W-50W

Automatic memory channel: 60 groups

Maximum combined inductance value: 17.21uH

Maximum combined capacitance value: 3869pF

Standing wavemeter: support

meter: Support (0.1W-150W)

Interactive mode: Bar mode, harge font mode, relay mode, curve graph mode, standingwave curve graph mode, CW exerciser mode, configuration menu mode

Autotune mode: support

Manual tuning mode: support

CW exercises: Supports external 3.5mm headphone jack, single paddle CW practice, supports front panel button trigger

CW propeller interface: 3.5MM headphone jack

: Support (automatic prompt when the standingwave exceeds the set value)

interface: USB-TYPE C

time: about 4 hours

Product : Maximum 5W

Standby time: About 150-200 hours (no tuning action)

Tuning duration: About 10-25 hours (activate 1-3 relays)

Item size: 154 * 74 * 29mm / 6.06 * 2.91 * 1.14in

Item weight: 400g / 0.88lb

Package size: 250 * 125 * 40mm / 9.84 * 4.92 * 1.57in

Package weight: 490g / 1.08lb



Packing List:

1 * Host

1 * TYPE-C Cable

2 * L-Wrench

4 * Pad

1 * English Instruction Manual