ATX3.0 4X8 Pin Female to Male 12VHPWR 12+4P 1-80° Angled Connector Power Adapter for RTX4090 / RTX4080 16GB/12GB Graphics Card

e5.0 Graphics Card ATX3.0 12VHPWR 12+4 16Pin 4W Power Supply Cable Adapter Male to Female 180 Degree Turn Connectors for RTX 4090 4080 4070 Ti 3090 Ti Graphics CardFeatures:1. High quality material and workmanship:ABS rubber shell, board, four layer board design, all copper tin plated, good conductivity, high fire rating, anti-, easy to plug and unplug, thickened and thick copper foil, ensuring stable high-power graphics card operation, beautiful appearance, equipped with shell protection, different from other similar products only bare board or EVA pad.2. Output up to 4W:This adapter supports RTX4090 with a maximum output of 4W, with a 6oz copper plating and four layer board design, effective heat diipation, and stable current nsmiion. Long term use of power output exceeding 4W may cause equipment damage. Pay attention to maintaining a good ventilation environment inside the chais3. 180 ° turn design:Connect the power cord and interface, without causing preure on the graphics card interface, and ensure long-term stable use. This design will reduce the preure on connectors and cables, ing them safer during aembly and long-term use, effectively avoiding the difficulty of cable arrangement caused by the graphics card bracket, and beautifying the power wiring of the graphics card4. Special reminder:Please ensure that the adapter is fully inserted into the and there should be no gaps. The board is involved in overheating protection, and it is not recommended to use graphics cards with overclocking power consumption higher than 4W; Please ensure that the power cord connector is fully inserted into the adapter (bending fro5mm of the connector) to avoid the connector not g fully inserted due to exceive bending angle of the power cord. This can cause uneven current load on the terminals and damage due to heat accumulation during full load operation of the 5. Strong compatibility:This 12VHPWR 4W 12+4PIN -E 5.0 steering head is designed specifically for RTX 4090 4080 4070 Ti 3090 Ti graphics cards. Please note that the graphics card brands applicable to the adapters in different directions may be different!Specification:Certification: CEOrigin: Mainland ChinaType: Extension CableModel Number: Turn ConnectorsMaterial: plastic++tinned copperColor: black, white (optional)Direction: Forward STD, Re RVS (optional)Interface: 16Pin (12+4PIN) male and female connectorsPower: 4WSize: 37 * 28 * 26mm/1.46*1.1*1.02inchWeight: 10gCompatibility:Forward STD:Applicable models: ROG-STRIX-RTX4090, TUF RTX 4090 Gaminuitable models: Nvidia GeForce RTX 4090, GeForce RTX 4090 Wind force, GeForce RTX 4090 Gaming, Aurus GeForce RTX 4090, Xtreme WaterforceRe RVS:Applicable models: Nvidia GeForce RTX 4090, GeForce RTX 4090 Gaming, Aurus GeForce RTX 4090, Xtreme WaterforceUnsuitable models: ROG-STRIX-RTX4090, TUF RTX 4090 Gaming, GeForce RTX 4090 Wind forceSelection instructions:Step 1: Confirm the number of pins on the graphics card power interfaceStep 2: Confirm the orientation of the interfaceAttention: Please pay attention to the direction of the connector before purchasing (forward or re)Kind reminder: This connector is 16Pin (12+4PIN)

Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.

1 x Power Connector