Auto-Sensing Car Immobilizer Security System Vehicle Anti-Theft Electronic Engine LoWith Anti-hiing RC Two Modes For Car

Points:1、【Micro-Electric Design】The main unit of the Car immobilizer system is even smaller, the e control is , and the new micro-electric technology brings you more safety.2、【Auto-Sensing Function】The e control of the Car security system alarm has an automatic sensing function, which can be used without any operation, preventing thieves from stealing the car and providing a safety guarantee for your car.3、【e Control Two Modes】Wirele immobilizer for a car has two e control modes. Manual mode is to pre the e control every time or immediately after powering on. In automatic mode, just bring the e control.4、【Led Indication Function】 Car Alarm immobilizer When receiving a signal from the e control, it fes once for 1 second, and when no signal is received, it fes 2 times per second for 11-20 seconds.

5、【Tools-】Car immobilizer anti-theft installation is very simple and can be DIYed completely. Just unplug the oil fuse in the engine compartment of the car, and plug in our main unit directly to rep it to complete the installation.

Features：The main unit of the Car immobilizer system is even smaller, the e control is ,The new micro-electric technology brings you more safety.The e control of the Car security system alarm has an automatic sensing function,SpecificationUnit working voltage: 12V±3VUnit quiescent current: ≤12mAUnit control current: ≤30Ae control operating current: ≤3~8mAe control standby current: ≤1uAe control battery specification: CR2032How to use the e control:Please keep the e control alone, do not mix it with the car keys to increase the diffity of grabbing. learning: Pre the host computer learning code switch to let go, and immediately pre the e control on, the relay in the host will beep 3 times to indicate that the code learning is succeful, and the method for learning the second e control is the same as above. Up to 2 can be learned. The code has been learned well when leaving the factory, and there is no need to repeat the operation.How to install:First, open the fuse box, find the oil fuse and pu ll it out, then rep it with the red wire plug, Keep the fuse in a safe p, fix the main unit with a tie and cover the fuse box.NOTICE:When not using the system, turn the e off for extended battery life, This product is not a waterproof design.Product List1 x Unit with wire (fuse=15A)2 x r Remomte1 x User manual in English