Automobile rolling shutter sunshade Automotive heat insulation curtain Automobile front gear automatic rectable sunshade

DescriptionHIGH QUALITY:The blackout is made of PVC fabric,solid and service life.That baof the sliver coating is anti-sun and reduce heat.easy to cleanPROTECT:It can bloharmful UV rays and reduce heat and noise from outside.WIDELY USED:Sun shade for windows, balcony doors, sloping roof or patio roof, bedroom, children's room, office room, hotel room, home cinema or motorhome.This product is packed in one piece, and each piece is equipped with 3 suction cups.Packaged include: 1x sun blind (with 3 suction cups)Specifications: width:40cm,height:60cm; width:40cm,height:125cm;width:45cm,height:125cm;width:50cm,height:125cm;width:58cm,height:125cm;The quality of the suction cup is made of brand-new materials, and the suction is quite good! You can suhorizontally or vertically at will! Everything is OK[instructions for use]:1. Clean your window gla to ensure that the suction cup can be stably adsorbed on the window2. Pre a suction cup with an alloy rod on one end of the window gla to fix the heat insulation curtain on one side of the window.3. The other suction cup is adsorbed on one end of the window. When in use, the plastic ring is pulled out and buckled on the suction cup at one end.4. When you don't want to use the heat insulation curtain, just gently pull the small round particles on the upper side of the suction cup to e the suction cup separate from the gla, and the heat insulation curtain will roll up automaticallyTips for installing sucker:Summer high temperature or time adsorption, placing, extrusion. If the suction cup is deformed or shows signs of falling off, please apply water around the suction cup slightly to strengthen the adsorption fastne. If the suction cup is deformed due to pack, you can put it in water and iron it to restore the prototype.