Automotive engine ENGINE COOLANT FOR FITTOYOTA Hiace III Kasten RZH101G Tacoma 2RZFE 2.4L L4 16100-79155 1989-1995

The car engine widely uses the centrifugal . The basic structure consists of a shell, connecting plate or belt pulley, water shaft and bearing or bearings, water imr and the water seal device and other parts, is the main part of the vehicle.Working princeThe engine drives the bearing and an imr to rotate by a belt pulley, the coolant is driven imr to rotate together, under the action of centrifugal force was thrown to the shell edge, at the same time produce a certain preure, and then from a or outflow. At the center of the imr coolant is thrown out and the preure is reduced, the cooling liquid tank in the inlet of the and the imr center differential preure under the action of water is sucked into the imr, realize the reciprocating cirating cooling liquid.Grease the bearing support the water shaft, so to prevent leakage of cooling to grease caused by grease emulsification, but also to prevent leakage of lubricating grease. Water seal leakage prevention measures of water seal and ket. Seal seal ring and the shaft through the interference fit between the imr and bearings, seal static sealing seat tightly preed on the casing, so as to achieve the purpose of cooling liquid seal.The casing through a sealing ket is connected with the engine, and supporting bearings and other moving parts. The casing and drain, located between the seal and the bearing. Once the coolant leakage water, can be discharged from a drain hole, in order to prevent the cooling into the bearing cavity and destruction of bearing lubrication and cause component corrosion. If the engine is stopped still coolant leaks out, indicates that the water has been damaged.Automotive engine ENGINE COOLANT FOR FITTOYOTA Hiace III Kasten RZH101G Tacoma 2RZFE 2.4L L4 16100-79155 1989-1995