Bleed Kit Filler Hydraulic Steering Syst Bridge Tube Filler Hose Hydraulic Steering System Oil Drain Kit For Inboard F8K4

Specification:Material: Polyurethane, Stainle SteelColor: Gold Tone, Black,ClearBridge Tube Inner Dia. :9mm/0.35 inchBridge Tube Length: 64cm/25.1 inchBridge Tube Outer Dia. : 10mm/0.39 inchFiller Hose Thread Size: 1/4 NPTFiller Hose Hole Dia. : 8mm/0.31 inchFiller Hose Length: 66.7cm/26.2 inchFiller Hose with Screw Cap Dia.: 26mm/1.02 inchFiller Hose with Screw Cap Outer Dia. : 12mm/0.47 inchFitment:Fit for Seastar inboard, outboard hydraulic steering syst. Used for refilling your boat's steering system .Basic Instructions:1. Attach bottle to helm reservoir (do not pierce bottle)(do not let bottle run empty).2. Connect bridge tube to fittings on steering cylinder and loosen fittings.3. Use helm to through system by turning the wheel in one direction. Air bubbles will be pushed to the reservoir at the helm.4. Manually swing the outboard through full artiation to relieve pped air.5. Note: Orientating fittings up while ing with helm will allow air to escape cylinder.6. Repeat 3-4 times neceary until no air is visible in bridge tube.7. Tighten fittings before removing bridge tube.Package Included:1 x Bridge Tube1 x Filler Hose with Screw Cap

Thank you for your support!Welcome to buy from us!We guarantee the quality of our products.Welcome to visit.Hope you have a nice day!