Blind Spot Detective System for Car

Universal BSD 24Ghz Millimeter Wave

Blind Spot Detective System Car Changee Safer Complete Kit

Product Descrtion:

This product is a blind area aistance system, which monitors the closing objects in the neigre within a range of 6 to 12 meters by two 24 GHz millimeter-wave s mounted on the rearper of the car. When the moving object enters the blind area, the LED light will be on to alert the driver. At the sane time, when the steering is also turned on , the system works in thee change aistant mode. The LED light will f rapidly and a sound will be given three times to alert the driver g careful to change ae. Ar the ACC is powered on, the system can immediately enter the working state ar the envmental adaptation test. When the car is turned off, the stops working.

Features:

1. Strong anti-interference capability.

2. detecting distance.

3. ligent algorithm,accurately judge whether the target is dangerous.

4. When the system is on, the system would start detecting objects in the blind area behind the vehicle 10 meters.

5. When moving objects get closer and faster than our own cars, LED and wilive a warning.

6. This item fits for most DC12v sedan, compact, SUV, MPVs, kup etc.

Warning:This system is only auxiliary during the driving. Please operate according to the actual ffic conditions.

Specifications:

ADAS: Advanced Driving Aistance System

Working Voltage: DC 9~16V

Working Current: 190MA±5MA

Working Temperature: -40℃~+85℃

Static current: ≤1mA

Working frequency: 24GHZ~24.25GHZ

Speed range: ≤120KM/h

Detect range: Rear side 6 to12 meters

Warning: and LED light

Brand:

Packing list:

Installation Method:1. Ar theper is removed, find a proper position for the probe module, Which is located on the asurface of theper.2. Install the bracket and loit tightly. The module is tighted a little bit with the supplied screw for further adjusting the angle(lotightly later on).3. Set A reference line, which is in parallel to the rear of the car.4. Chethe mounted angle like the ture shown below and then lock.5. Installation6. DiagramFunction Verification:Warning: The ACC cable must be controlled by the ignition switch of the car.