Bluetooth 5.0 Power Amplifier Audio Board Stereo Digital Amplifier Small Stereo AMP Home Theater With E Control-P40W E Control

Product D escrtion

10W/15W/20W Bluetooth digital power amplifier module stereo With volume adjustment

Operating voltage range: 8-24VDC

Adaptation speaker resistance: 4-16 Ω

Adapted speaker power: 30W-150W

Product Parameter

Product name : Bluetooth digital power amplifier module

Product model : XY-P15W/P40W

Working voltage : DC: 8~24V

Bluetooth version : 5.0

Transmiion distance : 15 meters (visible without obstruction)

Number of channels : two channels (stereo)

Output power (@ 1KHz) : 16W * 2 @ 12V 4 Ω

10W * 2 @ 12V 8 Ω

15W * 2 @ 16V 8 Ω

20W * 2 @ 20V 8 Ω

30W * 2 @ 24V 8 Ω

(need to add heat sink)

Adapted speakers (30W ~ 150W) : 4 ohms (8 ~ 12V power supply)

8 ohms (8 ~ 24V power supply)

16 ohms (8 ~ 24V power supply)

Module protection mechanism : re power protection Short circuit protection Self recovery overheating protection

Note: In order to improve the performance of the module, it is recommended that the amplifier ch and heat sink be used in the application scenarios that exceed 20W*2

Instructions

After turning on the power, the blue indicator light fes quickly and enters the Bluetooth mode; after the "prompt tone" is broadcast, it enters the pairing mode and waits for pairing; the mobile phone Bluetooth searches for "XY-P15W" (power amplifier board device name), and clicks "XY-P15W" Connect, play "prompt tone" after succeful connection, the indicator light is on, you can play mobile phone music, the indicator light fes slowly while playing music; after the Bluetooth is disconnected, the power amplifier board is ready for the next pairing, and enters after playing the "prompt tone" Pairing mode waits for pairing.

Connect as shown below: Pay A ttention

1. Use the power amplifier board as far away as poible from the WIFI signal (router)

2. The recommended power supply voltage is DC 8-24V, if it exceeds 26V, the ch will burn

3. When connected to a 4Ω speaker, the power supply does not exceed 12V, and when connected to an 8Ω speaker, the power supply does not exceed 24V

4. The power supply current is recommended to be above 2A

5. When the working power of the module exceeds 20W*2, a heat sink is required

6. The speaker wire should not be too long, it is suitable within 1 meter

7. Pay attention to static electricity protection. When touching the power amplifier board, you must first release the static electricity on your hands to avoid static electricity from breaking down the ch. Bluetooth chs are more sensitive to static electricity.

8. It is recommended to adapt the speaker with a rated power of 30W and above to avoid the speaker from heating and burning.

Note: There is a protective film on the acrylic panel, please tear it off when aembling, the acrylic is crystal clear.

Product D escrtion

30W/40W stereo Bluetooth power amplifier board (optional with e control)

Working voltage range: DC 5~24V

Interface: compatible with 5.5-2.1/2.5 power interface

Adaptation speaker: impedance 4~8Ω

Power: 40~200W

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.