Specification
Material: Aluminium alloy+plastic
Color: Blue, Black,Red
Size: 7.5x6.5cm/2.95x2.56in
Rubber Cover Size: 1.55/2.65/3.71 mm
Package include:1pc Double sided intake turbine
Description
It is installed on the intake hose of the engine. When the engine starts normally, it uses the inertial pull of the engine's natural intake to drive the space wheel blades to rotate at a high speed.
While rotating, it drives a large amount of fresh air to continuously enter the engine. At the same time, the incoming air is also forced to generate a vortex, so that the high-speed rotating air can be mixed with the fuel sprayed from the injector.
And the air density in the intake hose can be greatly improved, and the efficiency of the mixed air can be greatly increased. It will produce greater explosive power during combustion, which actually improves the power.
Suitable Car Models: Toyota 56-65mm (800cc-2000cc), Mazda 71 mm (>2000cc), Ford 56-71 mm(800cc->2000cc), Honda 71 mm (>2000cc), Mitsubishi 71 mm (>2000cc), Nissan 65 mm (1300cc-2000cc)
Installation
The double-sided turbine is installed in the intake hose between the original car's bellows and the throttle. When installing, it depends on the diameter of the original car's intake hose and the thickness of the rubber collar on the power wheel itself. The three rubber collars on the wheels have different thicknesses, which should be selected appropriately according to the diameter of the intake hose during installation.