Car Air Intake Turbine Refit Turbo Oil Saver Dual Fan Turbo rcharger Turbine Fit for Air Intake Hose Dia 65-74mm

Specification

Material: Aluminium alloy+plastic

Color: Blue, Black,Red

Size: 7.5x6.5cm/2.95x2.56in

Rubber Cover Size: 1.55/2.65/3.71 mm

Description

It is installed on the intake hose of the engine. When the engine starts normally, it uses the inertial pull of the engine's natural intake to drive the space wheel s to rotate at a high speed.

While rotating, it drives a large amount of fresh air to continuously enter the engine. At the same time, the incoming air is also forced to generate a vortex, so that the high-speed rotating air can be mixed with the sprayed from the .

And the air density in the intake hose can be greatly improved, and the efficiency of the mixed air can be greatly increased. It will produce greater power during combustion, which actually improves the power.

Suitable Car Models: Toyota 56-65mm (800cc-2000cc), Mazda 71 mm (>2000cc), Ford 56-71 mm(800cc->2000cc), H 71 mm (>2000cc), Mitsubishi 71 mm (>2000cc), Nian 65 mm (1300cc-2000cc)

Installation

The double-sided turbine is installed in the intake hose between the car's bellows and the throttle. When installing, it depends on the diameter of the car's intake hose and the thickne of the rubber collar on the power wheel its. The three rubber collars on the wheels have different thicknees, which should be selected appropriately according to the diameter of the intake hose during installation.