Car BSD BSM Blind Spot System Microwave r Change Lane Driving istance r Blind Spot

Car BSD BSM Blind Spot System Microwave r Change Lane Driving Aistance r Blind Spot

Features:

1. [Blind Spot System] There is a blind spot at the rear of the vehicle, which is likely to endanger driving safety! The system is a vehicle auxiliary device that helps the driver to safely change lanes during driving.2. [Working prince] With the help of 58GHz microwave r, detect whether there is a moving object on the side/baof the vehicle entering the blind area of the area.3. [ range] Lateral distance: 0.3m-5m (0.98ft-13.1ft); backside distance: 0.3m-10m (0.98ft-32.8ft). When the system is turned on, the system will begin to detect objects in the blind zone 10 x 50 feet behind the vehicle.4. [Safety protection] When you install BSM on your car, whether it is daytime, night or even snow, as as there is a moving object entering from the rear of the car, you can get the warning LED light, fing, and sound This allows the driver to be cautious when changing lanes to avoid the poibility of a side collision accident.5. [What will you get] You will receive 1 x control box, 2 x ulsonic , 2 x blind spot monitors (or LED lights), 1 x main wiring harne with . This is a DIY product, it is recommended to be installed by profeionals. We believe that you will be impreed by our ble and high-quality products!illuste:Ulsonic blind spot monitoring system detects the to eliminate the "blind zone" by installing two probes on the rear bumper of the car to detect vehicle speed signals. The system yzes and procees the nsmitted signals to understand the distance, speed, and moving direction of the vehicle behind.Through the system algorithm, fixed objects and distant objects, when a vehicle is detected close to the blind zone, the indicator light fes. At this time, the driver cannot see the vehicle in the blind zone, but he can also know that a vehicle is coming from behind and a collision occurs when changing lanes. It is dangerous. If the driver turns on the indicator light and prepares to change lanes without noticing the fing of the indicator light at this time, the system will iue a BI BI BI alarm to remind the driver again that the lane change time is dangerous and should not be changed.Throughout the driving proce, continuous and reminders can prevent ffic accidents caused by potential hazards such as bad weather, driver negligence, blind spots in the rearview mirror, and novices in the driving proce.The basic working prince of the BSD system is: turn on the system when the vehicle is driving. When a vehicle is found within the range of the ulsonic r, the LED will light up to remind. When the turn signal is turned on and ready to change lanes, it will e a sound and the LED will be Light up reminder.Specification:Type: General Blind Movement Monitoring System (BSM)Power supply voltage: 12VMaximum power: 5W (maximum)Working temperature: -40℃～+85℃Storage temperature: -40℃～+85℃Waterproof rating: IP67 range: 0m-5m. range accuracy: ±3cmThe package includes:1*controller2* probe1*1*Main wiring harne2*LED reminder light1*Acceory bag1*Warranty card

1*Instruction