Car Dent Puller Repair Tool Mechanical Sheet Metal Slide Auto Dent Cars Body Tools Suction Puller Kit Car Body Repair Part

Car Dent Puller Repair Tool Mechanical Sheet Metal Slide Auto Dent Cars Body Tools Suction Puller Kit Car Body Repair Part
【Specification】
Material: Aluminum Alloy
Color:As the picture show
Type: M10
Size: As the picture show

【Features】
100% and high quality.
It is made of aluminium alloy for strong strength and durability.
Used as a adapter for slide hammer or pulling tap for easy catching and pulling.
A necessary component for dent repair, direct repment for the broken one.
Easy , the thread size is M10 for better application.

【How to use this less dent repair kits 】
1.Clean the dent with a clean wet cloth
2.Mount the stick into the , pull the trigger to let the stick enter into the , connect the power source and preheat for 5 minutes
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the
drawing gasket is, the larger the drawing force is)
4. Pull the trigger and apply the drawing gasket with extruded (The 4 holes of gasket should be applied with hot melt )
5. Fast p the drawing gasket with hot melt at the center of dent, press lightly until the cures and adheres (Let the cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
6. Align the T-shaped repairer and press the drawing gasket with hot melt , pull the sliding rod backwards to pull up the dent
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen
8. Clean the repaired p with a clean wet cloth

【Packing lncluded】
Choose the kit you like

【Note】
The Size: Puller Kit does not contain . If you need to, simply buy and Sticks additionally.

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.