Car Dent Repair Puller, Car Repair Tools Kit With 18pcs Plastic Glue Tabs Metal T-Handle Dent Remover Universal For Car Accessor

This Product Is Suitable For The Adapter Of Slide Hammer Or Pull Hammer To Facilitate Catching And Pulling.
It Is Necessary To Repair The Dents And Directly Replace The Damaged Parts.
Easy To Install, Thread Size M10
How To Use This Paintless Dent Repair Kit:
1. Clean The Dent With A Clean Wet Cloth
2. Put The Glue Stick Into The Glue Gun, Pull The Trigger To Let The Glue Stick Enter The Glue Gun, Connect The Power And Preheat For 5 Minutes
3. Use Suitable Stretch Washers. Large Dents Require Large Stretch Washers. (Note: The Larger The Washer Is Stretched, The Greater The Tensile Force Is)
4. Pull The Trigger And Coat The Stretch Washer With Extruded Adhesive (the Four Holes Of The Washer Should Be Coated With Hot Melt Adhesive)5. Use Hot Melt Adhesive To Quickly Place The Stretch Washer In The Center Of The Dent, And Press Gently Until The Glue Is Solidified And Adhered (let The Glue Cool For About 8 Minutes. The Cooling Time Should Be Less Than 10 Minutes, And Should Be Shorter In Winter)
6. Align The T-shaped Repairer, Press The Stretch Gasket With Hot Melt Adhesive, And Pull The Sliding Rod Backward To Pull Up The DentShipping List: 1 Puller, 18 Labels
2*Hot melt adhesive, 1 * instruction manual

Please note that the hot melt gun is not included

This product requires a glue gun to be used