Car HUD Head Up Display For Gmc Yukon Sierra Envoy Savana Terrain 1500 ~ Safe Driving Screen II Connector

Car Head Up Display (HUDX6)Refkecting Car Informations On the Windshield -Saft Driving Screen -For Gmc Yukon Sierra Envoy Savana Terrain 1500The car with II or  or EU  Connector (If without, Please don't Order)Over Speed Alarm, Drivingigue Alarm, Mileage Time isticsDescrtion:Our multifunctional HUD product is developed based on II interface and has good cost-performance ratio. It is designed by adopting the latest integrated circuit with stable performance and has a beautiful and elegant appearance. The installation and adjustment examination can be finished within 3 minutes by using an easier and safer method.Notes:- Automatically adapt to the automobile models with II ( Bus Automatic System ) interface. Cheif it has the automobile socket under the steering wheel.- Identify the car's 16-pin socket, connecting the II cable to the 16-pin socket if it has this socket.- Put the non-sl pad onto the instrument pane, then put HUD on the non-sl pad, you can adjust the angle an position.- The reflective film may be affixed to the forward position of HUD and stito the front windshield, ensuring that the information, such as car speed can be projected to the reflective film.Main Features:- Plug and play, HUD can auto adapt to vehicle type which in line with II or EU ( On-Board System ).- Comprehensive display, HUD can display many s at the same time as follows, vehicle speed, engine speed, low voltage alarm, high temperature alarm, speed alarm, free switching between kilometer and mile, free switching between cende and fahrenheit.- Suitable size, the display area is 3 inches which is very clear for driver to read data.- ible brightne adjustment, the brightne can be adjusted automatically or manually to reach the best state which is in harmony with the envment.- Automatic power on and off, starting with the vehicle starting, stopping with the vehicle stopping to protect the vehicle's battery.SpecificationType: Head up display X6Material: ABSColor: BlackDisplay type: DialCar model: With On-Board II interfaceProduct Size: (3.38x2.12x0.47)" / (8.6x5.4x1.2)cm (L x W x H) Size: 3.0 inchEnvment: ~40c+80c atmospheric preure 86-106kpauyAlarm sound level: >>=30dbWorking voltage: DC9-16VWorking current: 40mASleeping current: 15mASpeed range: 0-400KMHUD installation procedure1.Ensure your vehicle is II compatible or EU.a.  Chearound the area under the steering wheel for an plugb.  Contact your vehicle manufacturer or search onlinec.  Open the bonnet and look for a II compatible sticker (this is NOT on all II compatible cars, therefore isn’t a deciding factor)2.Locate the 16 pin link (see ture 2). This is usually located in the area under the steering wheel.3.Start vehicle’s engine and ensure power switch is in the on position.4.HUD will power on with enginea. If the HUD displays vehicle voltage, consumption, speed and rotational speed the unit has installed correctly.b. Failing the above: Wait up to one minute for to sync and confirm cable is plued in properly.