Car Immobilizer Anti-Theft Alarm System, M506 Wireless Engine Lock, Auto Anti-Robbery Device, ligent Circuit Cut Off Tool

Anti-theft Device M506 12V Immobilizer Circuit Cut Off Engine LoFor line Car Motorcycle Wirele Anti-robbery SystemThis is a new type of car immoblizer system. Compared with other similar products on the market, it has a relatively new design. The main unit is smaller, the e control is and thin, and the new micro-electric technology brings you more safety and installation is very simple, you can DIY, directly unplug the oil circuit fuse in the engine compartment of the car, and plug our main unit directly into the repment to complete the installation. Just fix it and cover the engine cover and you can use it. The e control comes with Auto-sensing function, no need to operate, you can hide the e control in your wallet or other ps, no one will notice, even your closest friends don't know that you have installed new products in technology, you can refuse gracefully borrowing cars from others, or preventing thieves from stealing cars, provides a safe guarantee for your car.

Features:

1.Circuit lomode (no short-circuit ring is inserted in the unit inside) factory default mode

If the car does not receive the signal from the e control within 16 seconds after starting the car, the engine will turn off. The car can start normally if it receives the signal from the e control within 16 seconds of starting. Even if it no longer receives the signal from the e control, it will not turn off.

2. e control operation:

Manual mode: pre the e control every time or immediately after start-up.

Automatic mode: Just bring the e control.

LED indication function: When receiving a e control signal, the LED fes once, indicating that the

signal is normal, and no signal will not f.

3. Anti-robbery mode: (the host inserts a short-circuit ring)

When the host receives the signal from the e control, the car can start normally, and it needs to continue to receive the signal from the e control in the middle, otherwise it will turn off after 30 seconds if the signal is not received.

LED indication: when the signal from the e control is received, it fes once for 1 second, when the signal is not received, it fes 2 times per second for 11 to 20 seconds; when the signal is not received for 21 to 30 seconds, the LED fes 4 times per second. (After 30 seconds Have not received the signal LED does not light)

The e control in anti-robbery mode must turn on the automatic mode, otherwise it will turn off halfway due to no signal received.

Specifications:

Unit working voltage: 12V±3V

Unit quiescent current: ≤12mA

Unit control current: ≤30A

e control operating current: ≤3~8mA

e control standby current: ≤1uA

e control battery specification: CR2032

e control frequency: 433.92MHz

Notice:

When not using the system ,turn the e off for extends battery life ,This product is not waterproof design.

Product size:

Unit:48*26*15mm

e:33*33*4.5mm

Packing box:165*92*48mm

Package Include:

Package list:(1 set)

1 x Unit with wire (fuse=15A)

2 x r Remomte

1 x User manual in English

How to use the e control:

Please keep the e control alone, do not mix with the car keys to increase the diffity of grabbing.

learning: Pre the host computer learning code switch to let go, immediately pre the e control on, the relay in the host will beep 3 times to indicate that the code learning is succeful, and the method for learning the second e control is the same as above. Up to 2 can be learned. The code has been learned well when leaving the factory, and there is no need to repeat the operation.

How to install:First open the fuse box, find the oil fuse and pull it out, then rep it with the red wire plug , Keep the fuse in a safe p , fix the main unit with a tie and cover the fuse box.