Car Pedal Car Non-Slip Pedal Manual Gear/Automatic Accelerator and Brake Pedal Car Supplies

Product Name: Xb-373 Non-Slip Pedal

Product Material: Aluminum Alloy Non-Slip PVC Synthetic Resin Board

Item Color:: Red Blue Silver

Product Material: Aluminum Alloy Plastic Baby Weight: Packaging Weight Is about 0.27kg

Product Specifications:: Manual Gear Size: (Throttle) 14.5*7.5cm;(Brake, Clutch) 9 * 6.6cm

Automatic Gear Size: (Throttle) 14.5*7.5cm;(Brake) 13 * 8.5cm

Most Models Are Suitable, except for a Few ModelsCustomer Feedback: for Example, GWM Haval H3/Cruze Automatic Gear/Ma Zida Three Automatic Gear/Jinrui/Golf/GAO ER/Geely Emgrand Automatic Gear/New Sail Automatic Gear/05 Sunshine/It Cannot Be Installed Properly. Customers of This Model Should Not Purchase It.

This Product Has Fine Workmanship, and the Personalized Design of DIY Is Avant-Garde; It Is Made of High-Strength Aluminum Alloy Material, Which Is More Wear-Resistant. This Product Also Has Anti-Skid Design to Enhance the Safer Handling Performance of Driving.

Increase Foot Area and Enhance Safety Control Performance

Each Pedal Is Equipped with Fixed Screws, Easy to Install by Yourself

High-Quality Aluminum Alloy Non-Slip Particles, New Design, Make You More Comfortable to Control the Pedal, Add a Safety and Beauty for Driving

Product Introduction:
1. Made of High Quality Aluminum Alloy, Fine Workmanship, Personalized Design, Light and Beautiful, Make You More Comfortable to Control the Pedal and Unwheeling Easier.

2. the Block Design and Texture on the Pedal Can Play a Good Anti-Skid Role, Which Is Safer and More Reliable.

3. the Installation Is Simple and Convenient, and There Is No Need to Drill Holes on the Original Pedal.

4,Applicable to Most Models,In Addition to a Few Models: Such as GWM Haval H3, Cruze, and Pulima, Please Contact Customer Service for Details.

[Precautions]]
1. If the Pedal Is Still Loose after Installation, Please Check and Reinstall It.
2. If the Pedal Is Hung Carpet Or Touches the Intermediate Wall, It May Cause the Pedal to Lose Its Function and Be Rebounded Back. at This Time, the Screw Should Be Loosened to Move the Pedal.
3. between the Pedal and the Side Wall, Keep a Space of Not Less than 5mm So That the Pedal Can Work Freely to Avoid Danger.
4. Tens of Millions Can Be Operated When the Car Is Stopped and Completely Shut down.

Some Customers Reported That the Pedals Received and Their Own Cars Were Not Approved. Because the Size Is Designed by the Manufacturer to Suit Most Models, We Cannot Estimate the Pedal Size of Your Own Cars, therefore, If You Are Not at Ease, We Recommend That You Measure the Pedal Size of Your Own Car before Purchasing, and Then Buy It If It Is Consistent with Ours, Otherwise, Because the Size Does Not Match, if You Need to Return the Goods, You Need to Bear the Freight Yourself O(& Cap ^_& Cap;)O ~

Product Name: Xb-373 Non-Slip Pedal

Product Material: Aluminum Alloy Non-Slip PVC Synthetic Resin Board

Item Color:: Red Blue Silver

Product Material: Aluminum Alloy Plastic Baby Weight: Packaging Weight Is about 0.27kg

Product Specifications:: Manual Gear Size: (Throttle) 14.5*7.5cm;(Brake, Clutch) 9 * 6.6cm

Automatic Gear Size: (Throttle) 14.5*7.5cm;(Brake) 13 * 8.5cm

Most Models Are Suitable, except for a Few ModelsCustomer Feedback: for Example, GWM Haval H3/Cruze Automatic Gear/Ma Zida Three Automatic Gear/Jinrui/Golf/GAO ER/Geely Emgrand Automatic Gear/New Sail Automatic Gear/05 Sunshine/It Cannot Be Installed Properly. Customers of This Model Should Not Purchase It.

This Product Has Fine Workmanship, and the Personalized Design of DIY Is Avant-Garde; It Is Made of High-Strength Aluminum Alloy Material, Which Is More Wear-Resistant. This Product Also Has Anti-Skid Design to Enhance the Safer Handling Performance of Driving.

Increase Foot Area and Enhance Safety Control Performance

Each Pedal Is Equipped with Fixed Screws, Easy to Install by Yourself

High-Quality Aluminum Alloy Non-Slip Particles, New Design, Make You More Comfortable to Control the Pedal, Add a Safety and Beauty for Driving

Product Introduction:1. Made of High Quality Aluminum Alloy, Fine Workmanship, Personalized Design, Light and Beautiful, Make You More Comfortable to Control the Pedal and Unwheeling Easier.

2. the Block Design and Texture on the Pedal Can Play a Good Anti-Skid Role, Which Is Safer and More Reliable.

3. the Installation Is Simple and Convenient, and There Is No Need to Drill Holes on the Original Pedal.

4,Applicable to Most Models,In Addition to a Few Models: Such as GWM Haval H3, Cruze, and Pulima, Please Contact Customer Service for Details.

[Precautions]]1. If the Pedal Is Still Loose after Installation, Please Check and Reinstall It. 2. If the Pedal Is Hung Carpet Or Touches the Intermediate Wall, It May Cause the Pedal to Lose Its Function and Be Rebounded Back. at This Time, the Screw Should Be Loosened to Move the Pedal. 3. between the Pedal and the Side Wall, a Space of Not Less than 5mm Should Be Kept So That the Pedal Can Work Freely to Avoid Danger. 4.10 Million Can Be Operated When the Car Is Stopped and Completely Shut down.

Some Customers Reported That the Pedals Received and Their Own Cars Were Not Approved. Because the Size Is Designed by the Manufacturer to Suit Most Models, We Cannot Estimate the Pedal Size of Your Own Cars, therefore, If You Are Not at Ease, We Recommend That You Measure the Pedal Size of Your Own Car before Purchasing, and Then Buy It If It Is Consistent with Ours, Otherwise, Because the Size Does Not Match, if You Need to Return the Goods, You Need to Bear the Freight Yourself O(& Cap ^_& Cap;)O ~

Product Name: Xb-373 Non-Slip Pedal

Product Material: Aluminum Alloy Non-Slip PVC Synthetic Resin Board

Item Color:: Red Blue Silver

Product Material: Aluminum Alloy Plastic Baby Weight: Packaging Weight Is about 0.27kg

Product Specifications:: Manual Gear Size: (Throttle) 14.5*7.5cm;(Brake, Clutch) 9 * 6.6cm

Automatic Gear Size: (Throttle) 14.5*7.5cm;(Brake) 13 * 8.5cm

Most Models Are Suitable, except for a Few ModelsCustomer Feedback: for Example, GWM Haval H3/Cruze Automatic Gear/Ma Zida Three Automatic Gear/Jinrui/Golf/GAO ER/Geely Emgrand Automatic Gear/New Sail Automatic Gear/05 Sunshine/It Cannot Be Installed Properly. Customers of This Model Should Not Purchase It.

This Product Has Fine Workmanship, and the Personalized Design of DIY Is Avant-Garde; It Is Made of High-Strength Aluminum Alloy Material, Which Is More Wear-Resistant. This Product Also Has Anti-Skid Design to Enhance the Safer Handling Performance of Driving.

Increase Foot Area and Enhance Safety Control Performance

Each Pedal Is Equipped with Fixed Screws, Easy to Install by Yourself

High-Quality Aluminum Alloy Non-Slip Particles, New Design, Make You More Comfortable to Control the Pedal, Add a Safety and Beauty for Driving

Product Introduction:
1. Made of High Quality Aluminum Alloy, Fine Workmanship, Personalized Design, Light and Beautiful, Make You More Comfortable to Control the Pedal and Unwheeling Easier.

2. the Block Design and Texture on the Pedal Can Play a Good Anti-Skid Role, Which Is Safer and More Reliable.

3. the Installation Is Simple and Convenient, and There Is No Need to Drill Holes on the Original Pedal.

4. Most Models Are Applicable, except for a Few Models: Such as GWM Haval H3, Cruze, Pulima, Etc. For More Information, Please Contact Customer Service.

[Precautions]]
1. If the Pedal Is Still Loose after Installation, Please Check and Reinstall It.
2. If the Pedal Is Hung Carpet Or Touches the Intermediate Wall, It May Cause the Pedal to Lose Its Function and Be Rebounded Back. at This Time, the Screw Should Be Loosened to Move the Pedal.
3. between the Pedal and the Side Wall, Keep a Space of Not Less than 5mm So That the Pedal Can Work Freely to Avoid Danger.
4. Tens of Millions Can Be Operated When the Car Is Stopped and Completely Shut down.

Some Customers Reported That the Pedals Received and Their Own Cars Were Not Approved. Because the Size Is Designed by the Manufacturer to Suit Most Models, We Cannot Estimate the Pedal Size of Your Own Cars, therefore, If You Are Not at Ease, We Recommend That You Measure the Pedal Size of Your Own Car before Purchasing, and Then Buy It If It Is Consistent with Ours, Otherwise, Because the Size Does Not Match, if You Need to Return the Goods, You Need to Bear the Freight Yourself O(& Cap ^_& Cap;)O ~

Product Name: Xb-373 Non-Slip Pedal

Product Material: Aluminum Alloy Non-Slip PVC Synthetic Resin Board

Item Color:: Red Blue Silver

Product Material: Aluminum Alloy Plastic Baby Weight: Packaging Weight Is about 0.27kg

Product Specifications:: Manual Gear Size: (Throttle) 14.5*7.5cm;(Brake, Clutch) 9 * 6.6cm

Automatic Gear Size: (Throttle) 14.5*7.5cm;(Brake) 13 * 8.5cm

Most Models Are Suitable, except for a Few ModelsCustomer Feedback: for Example, GWM Haval H3/Cruze Automatic Gear/Ma Zida Three Automatic Gear/Jinrui/Golf/GAO ER/Geely Emgrand Automatic Gear/New Sail Automatic Gear/05 Sunshine/It Cannot Be Installed Properly. Customers of This Model Should Not Purchase It.

This Product Has Fine Workmanship, and the Personalized Design of DIY Is Avant-Garde; It Is Made of High-Strength Aluminum Alloy Material, Which Is More Wear-Resistant. This Product Also Has Anti-Skid Design to Enhance the Safer Handling Performance of Driving.

Increase Foot Area and Enhance Safety Control Performance

Each Pedal Is Equipped with Fixed Screws, Easy to Install by Yourself

High-Quality Aluminum Alloy Non-Slip Particles, New Design, Make You More Comfortable to Control the Pedal, Add a Safety and Beauty for Driving

Product Introduction: 1. High Quality Aluminum Alloy Is Made with Fine Workmanship, Personalized Design and Light and Beautiful, Which Makes You More Comfortable to Control the Pedal and Easier to Unwheeling.

2. the Block Design and Texture on the Pedal Can Play a Good Anti-Skid Role, Which Is Safer and More Reliable.

3. the Installation Is Simple and Convenient, and There Is No Need to Drill Holes on the Original Pedal.

4. Most Models Are Applicable, except for a Few Models: Such as GWM Haval H3, Cruze, Pulima, Etc. For More Information, Please Contact Customer Service.

[Precautions]]1. If the Pedal Is Still Loose after Installation, Please Check and Reinstall It. 2. If the Pedal Is Hung Carpet Or Touches the Intermediate Wall, It May Cause the Pedal to Lose Its Function and Be Rebounded Back. at This Time, the Screw Should Be Loosened to Move the Pedal. 3. between the Pedal and the Side Wall, a Space of Not Less than 5mm Should Be Kept So That the Pedal Can Work Freely to Avoid Danger. 4.10 Million Can Be Operated When the Car Is Stopped and Completely Shut down.

Some Customers Reported That the Pedals Received and Their Own Cars Were Not Approved. Because the Size Is Designed by the Manufacturer to Suit Most Models, We Cannot Estimate the Pedal Size of Your Own Cars, therefore, If You Are Not at Ease, We Recommend That You Measure the Pedal Size of Your Own Car before Purchasing, and Then Buy It If It Is Consistent with Ours, Otherwise, Because the Size Does Not Match, if You Need to Return the Goods, You Need to Bear the Freight Yourself O(& Cap ^_& Cap;)O ~

Product Name: Xb-373 Non-Slip Pedal

Product Material: Aluminum Alloy Non-Slip PVC Synthetic Resin Board

Item Color:: Red Blue Silver

Product Material: Aluminum Alloy Plastic Baby Weight: Packaging Weight Is about 0.27kg

Product Specifications:: Manual Gear Size: (Throttle) 14.5*7.5cm;(Brake, Clutch) 9 * 6.6cm

Automatic Gear Size: (Throttle) 14.5*7.5cm;(Brake) 13 * 8.5cm

Most Models Are Suitable, except for a Few ModelsCustomer Feedback: for Example, GWM Haval H3/Cruze Automatic Gear/Ma Zida Three Automatic Gear/Jinrui/Golf/GAO ER/Geely Emgrand Automatic Gear/New Sail Automatic Gear/05 Sunshine/It Cannot Be Installed Properly. Customers of This Model Should Not Purchase It.

This Product Has Fine Workmanship, and the Personalized Design of DIY Is Avant-Garde; It Is Made of High-Strength Aluminum Alloy Material, Which Is More Wear-Resistant. This Product Also Has Anti-Skid Design to Enhance the Safer Handling Performance of Driving.

Increase Foot Area and Enhance Safety Control Performance

Each Pedal Is Equipped with Fixed Screws, Easy to Install by Yourself

High-Quality Aluminum Alloy Non-Slip Particles, New Design, Make You More Comfortable to Control the Pedal, Add a Safety and Beauty for Driving