Car Power Dual LCD Dial Display Car Charger Converter Modified Sine Wave for Auto Steamboat Accessories

Specification:Color: black, yellow (optional)Material: aluminum alloy+ABSInput voltage: DC 12V (voltage range: 10.5V~15V)(When the battery voltage is lower than 10.5V, the is under low voltage protection; when the battery voltage is higher than 15V, the is under high voltage protection)Output voltage: AC 110V/220V for user selectionOutput frequency: 220V 50Hz/110V 60Hz.Peak power: 4000WRated power: 300W efficiency: 0.9Display: LED dual displayOutput interface: international universal socketOutput waveform: Modified Sine WaveProduct size: about 165 * 112 * 56mm/6.50 * 4.41 * 2.20inchGro weight: 600gCAUTION:1.The power comes with free arette and 2pcs battery clips, providing 400Watt continuous power, 4000watt peak power (Please e sure that the total rated power of the connected devices is ≤ 300W).2.This is a modified sine wave ,NOT applicable for devices which work by built-in motor, hair dryers,air conditioners, coffee machine,water , induction cooker,refrigerators and microwave ovens etc.e sure that the total rated power of the connected devices is ≤ 300W3.Tighten the Positive (+) and Negative (-) terminals when the car converter is in use.4.If the converter is directly connected with the arette . The highest out put power must be under 150W. If higher than 150W,we strongly recommend you using the Alligator Clips to a battery ,because car arette might not afford power over 150W.5.The car converter suitable for DC12V and Car ONLY, not applied for DC 24V and airplane.6.Please do not leave the in the ON position before car start.It's easy to damage the before connected to the battery.The correct operation is connect to the battery first and then turn on the switch.7.If you wanna run a inductive load for a time, it`s suested to buy a pure sine wave .8.It's normal for the to become warm while you are using it.In order to get the best using results, please put the on the flat surface The working p should meet the following criteria:a. Keep dry, should not let the contact the water or other liquids, keep the away from moisture or water.b. Cool environment, keep the temperature between 0 Celsius degrees and 40 Celsius degrees. Do not put the next to heat vents or other devices. Try to keep the not be shined directly by the sunshine;c. If input voltage display is low, customer needs to charge the battery before using it. Cause the battery is out of power, the is in a protected state.

Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.

1 x 2 x Battery clip1 x arette plug1 x Instructions