Carbon Brush Motor Plastic Rear Bearing Cover Cover Separation Tool FC280 FC130 Motor BaCovers Disembly Tool

Product DescriptionShipping: within 24 hours on working dayMaterial: AlloySize: as photo show

Instructions:

1. P the narrow end at the connection between the motor cover and the aluminum sheet.

2. Hold the tail and pre down.

3. Until the aluminum sheet stands up, repeat the operation on the other side.

4. Manually separate the outer cover and open it smoothly and perfectly.

Be applicable:

*FC280 motor, 130 motor, etc.

*The aluminum sheet wrapped outer cover (receed point) i0 degrees -"┓".

If the inner sheet isInner Cladding-"┏"then cannot use.

*The depreion between the aluminum sheet and the outer cover is greater than or equal to 1.8mm.

--------------------------------------------------------------------------------------------------------------------------------------------------------

Advantage

1. able: black, the shapeis simple and easy to understand

2. Lightweight: weight 52g, easy to carry

3. High quality

*made of alloy

*with clear emboing,

*the anti-rust is not easy to fade.

4. Easy to operate: wide in front and narrow in back, easy to grip

5. Practical diversity

Most motors with a shell preure opening larger than 1.8mm can be used.

Item show

Under what circumstances do you need to open the motor cover?

1. Chethe internal condition and find out the cause of damage.

2. Modify the motor and rep it with higher quality electrolytic copper wire.