CC1101 Wireless Module With SMA Wireless nsceiver Module For 433MHZ Enhance The Signal For 380 Meters

Features:1.CC1101 RF chip with ul-low power consumption of only 0.5uA2.Long distance, measured distance greater than 380 meters (depending on the presence of obstacles in the environment)3.Standard interface, mode 0, communication rate up to 10Mbps4.High reception sensitivity -117dpm@250kbps5.Fully industrial grade components, standard SMA interface, support for low-power development

s:Product Name: CC1101 Wirele ModuleRF chip: CC1101Center frequency: 433MHzCenter frequency: 10mWCommunication distance: 380 metersWorking voltage: 1.9-3.6VDC, meeting battery power supply requirements.Interface method: 2 * 4 * 2.54 (universal board DuPont cable can be used)Communication level: 07VDD-3.6VDCThe measured distance is greater than 380 meters (depending on the presence of obstacles in the environment)Maximum power: 10dpm (approximately 10mw)Air speed: 1.2kbps-500kbps (due to the physical characteristics of 433, it is recommended not to exceed 20kbps)Emiion current: 29.2mA (peak)Receiving current: 14.7mACommunication interface: Standard interface, mode 0, communication rate up to 10Mbpsnsmit and receive length: 1-32 bytes per single packet, level 3 FIFO erRSSI support: Supports RSSIWorking temperature: -30 ℃ -+85 ℃Working humidity: 10% -90% relative humidityStorage temperature: -40 ℃ -125 ℃Working frequency range: 387MHz-464MHz (adjustable through , recommended 433 (plus or minus 10%)Receiving sensitivity: -117dpm@250kbpsModule size: approximately 28mm * 15mm rod length: approximately 49.6mmPin number - Pin name - Pin direction - Pin purpose:GND - Ground wire connected to power reference groundThe VCC power supply must be between 1.8 and 3.6VGDD0- Output - Module information output pinCSN input module chip selection pin, used to initiate an communicationSCK Input Module Bus ClockMOSI input module data input pinMISO/GD01 Output - Module Data Output PinGD02 Output Module Information Output Pin

Package include:1X module1X