China New GADGET OBD2+GPS HUD On-board Computer A-pillar trim Install RPM Turbo Pressure Oil & Water

China New HUD OBD2+GPS Smart Gauge On-board Computer A-pillar trim Install RPM Turbo pressure Oil Water Temp. GPS Speedometer
Main Function: OBD+GPS 2 in 1 dual working system,which can work on all vehicles.
If OBD is incompatible, please go to setting page to switch the working mode into GPS MODE: Keep the speed at 0, and long press OK Button to enter setting page → Setting → OBD Switch → ON / OFF, Choose OFF OBD Switch, then the device will enter GPS Working mode.
1.OBD mode information display:vehicle speed,water temperature, Oil temperature, voltage,fuel consumption,RPM, single mileage, total cumulative mileage, travel time, system time, intake pressure, air-fuel ratio,turbine pressure, intake pressure, acceleration test, brake test, PID Data, read data stream.
Alarm:Over-speed alarm, Speed alarm, High water temperature alarm, Low voltage alarm,Engine fault alarm, Clear fault code, Free switching between kilometer and miles, Celsius and Fahrenheit switch freely(°C ℉ Switch), KM/h  MPH Switch, Bar PSI Switch...
2. GPS mode information display:speed, travel time, satellite time, altitude, number of satellites, driving direction, single mileage, voltage, acceleration test, brake test.
Alarm:Overs-peed alarm, Low voltage alarm, Free switching between kilometer and miles,KM/h  MPH Switch...
Product Highlights:
1: OBD + GPS dual system, can be suitable for all cars.
2: Two installation methods: A-pillar installation + center console installation. The first HUD on the market can be installed on the A-pillar trim.
3: The first HUD on the market with screen can rotate 270 degrees.
4: In the first HUD with small code table, the highest resolution reaches 240 * 240
5: Turbine pressure: PSI and KPA units switch freely.
Fuel consumption units KM/L and L/100km
6: Up to 10 Hz refresh rate without Csreen lagging.
7:The first HUD to show all data of OBD+GPS dual mode, no need to switch working system if OBD2 protocol is compatible.
8:Default version is in Neutral Brand for drop-shipping orders, dont mark any our on the product or package. And can also put onCustomized if needed.
9. If the device cant work as your expectations, we support 15-day return for refund without reason  ( but please kindly contact us in advance for the procedures).
ACE S1  hud head-up display
100% compatiblility OBD+GPS dual system
HD display,no double image,clear effect in day time
metal nanotechnology on the front side to remove unwanted reflections for clearer display
Tech Specification:
Product Certificates
CE, RoHS, FCC
Environment temperature
- 40 °C— +80 °C
Barometric press
86-106KPa
Relative humidity
10%-95%
Environment voice
=60dB
Work voltage
11V~18Vdc(12Vdc/200mA)
Sleep current
=30mA
Display way
Virtual image reflection
Display channel
HD LCD Display
Reflector transmittance
98%
Product Features:
1. Stereoscc imaging. Display the information three-dimensionally through the translucent semi-reflective lens. No reflection, zero ghosting, and clearer display during daytime.
2. Exquisite and unique design, free from external light, no film is needed, no unnecessary reflection picture, plug and play, easy to operate.
3. Powerful and practical function display, such as speed, water temperature and voltage, etc. HUD could eliminate the fault code displayed on the engine dashboard without professional equipment.
4. Early warning of the high water temperature and low voltage to avoid Car breakdown.
5. OBD2+GPS dual mode is suitable for all car models.
Kindly Notice:
OBD2 working system:Workingvoltage: 11~18VDC (12VDC/200mA),when the voltage is higher than 24V, please use a USB cable for GPS mode.
System selection: When HUD is power on, pull up the setting button to select the language and systems. Default system is OBD.
Attention:
1. OBD2 Working mode are not compatible with follow vehicles:
2. Oil and electricity mi, diesel powered car, Pick up, SUV, ORV.
3. Below special cars not support: