Chives Seeds for Planting 200 Pcs Vegetable Seeds for Gardening High Germination Bonsai Seeds Balcony Vegetable

Our store are high quality seeds sourced from all around the world which are hand picked varieties specifically for optimal growing in Asian. Select Seeds are only commercially acceptable (uniform growth, high germination, long life shelf, top rated market varieties) making sure we bring only the best available seeds at an affordable price.

growth habit
1. Temperature: chives prefer cold and cold and tolerate cold and heat, the optimum temperature for seed germination is above 12 ° C, the growth temperature is 15 ° C to 25 ° C, and the underground part. can withstand lower temperatures .
2. Light: moderate light intensity, strong negative resistance. However, if the light is too low The accumulation of photosynthetic products is minimal. Low tillage and thin, low yields and prone to premature deterioration. If the light is too bright the temperature is too high There is a lot of fiber and low quality.
3. Humidity: The optimum relative humidity is 60-70%, and the soil moisture is 80-90% of the maximum water capacity in the field.
4. Soil Nutrients: Adaptable to soil texture, optimum pH is 5.5-6.5, requires a large amount of fertilizer, and has good fertilization tolerance.

how to plant seeds
1. Soaking seeds: Soaking seeds can increase the size of the seeds at the appropriate temperature. Increase germination resistance and seed adaptability. and at the same time remove the seedlings Lay a good foundation for improving germination rates. Some farmers' friends burned the seeds first and then soaked the seeds. which is easy to lose seed germination ability under extreme high temperature. This results in a decrease in the vitality of some seeds which is not desirable. The amount of water used for soaking seeds is limited to soaking the seeds. so as not to reduce the seed germination rate due to too much water. The seed soaking temperature is about 20℃, which is conducive to the seed reaching the optimum temperature range of the life force and increasing the germination power. to keep the body warm The seeds can be soaked in the incubator or duvet for day and night.

2. High-temperature blanching: The use of high-temperature heat of water to disinfect the seed surface and the seed hiding place is also an important method to destroy seed dormancy and increase its vitality. of the seeds when blanching the seeds The water temperature is controlled at 55-60 °C and the time is controlled at 20 minutes to maintain the water temperature. You can put a thermometer in the water. and add hot water at a time when the water temperature is low To keep the seeds evenly hot, continue stirring. If the seeds are small, they can be blanched in a thermos. Rinse the blanched seeds with clean water once. and can germinate after drying

3. Disinfection: Including: ① Seed disinfection. to make sure the seeds are free of bacteria Seeds can be soaked with 1% solution of copper sulfate for 5 minutes after high temperature treatment. or soaked with 0.3% dysensink for 15 min and then rinsed with water. ② There are two methods of disinfection of seedbeds: toxic soil disinfection and nutrient soil disinfection. Till before sowing 15 days before sowing, mix 10 g of 64% antiviral alum with 10 kg/m2 fine soil, sprinkle in the soil and prepare the soil after half a month. The latter uses 70% pentachloronitrogen. After mixing equal amounts of benzene powder and 65% zinc powder, Generally, each cubic meter of nutrient soil is mixed with 0.12-0.15 kg of compound and mixed well. 1/3 of the top herb soil is used as the bottom soil and 2/3 is the seed soil.

4. Nursery decoration: To ensure that the ejected seeds can emerge smoothly on the seedbed. The seed plot should be completed. Nutrient soil should be added to the boundary in time until the soil is broken in the field, the edges are slightly elevated and the middle of the border is flat, and there should be no unevenness and wide soil particles, peas. The same, water the bottom of the plant before sowing the seeds, and the watering is in accordance with the natural drying standards.

5. Germination and sowing: The soaked seeds are washed 1-2 times and wrapped in a clean cloth. Put it in a clay pot or non-sticky clay pot. Cover with a damp cloth and place in a room with a temperature of about 20°C. For germination only that requires heat from an electric blanket or electric lamp to germinate and temperature is controlled. When germination, the seeds should be turned over often. and wash with warm water every day, otherwise the seed penetration will be affected. and the seeds will die due to lack of oxygen. After washing, drying and then stimulating, generally 2 to 3 days later, when 30% of the seeds are white, they can be sown. Sow evenly when sowing Cover with 2 cm thick soil after sowing. and prevent disease in the seedling stage in time after planting

6. Keep the soil moist after sowing, water less, but spray often (a small amount each time).

7. After the seeds have basically germinated (Some seeds do not germinate, do not have to wait) When germination reaches 10-15 cm long, it can be considered transplanted.

note:
1. Due to the packaging of the machine Please allow a small error in the number of seeds. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the item.