Crystal Gear Shift Knob Handle For 1 2 3 4 8 Series X3 X5 X6 X7 G20 G29 G30 G06 G07 G08 G05 F40 F44

The product is left-hand drive (LHD) by default.
Not suitable for right-hand drive(RHD) vehicles
Note：
1. The product does not require coding and can be used directly after installation.
2. Retain original configuration agreement without breaking the wiring harness
3. Does not affect the use of iDrive
4. The product is real artificial crystal.
5. Replacement installation, easy to install
Features：
1. Please note the model and year of your vehicle.
2. This product is carefully made of high-quality artificial crystal.
3. Exquisite workmanship, eent quality, built according to original factory 1:1 specifications.
4. Allow you to enjoy the pleasure of driving a car with the highest configuration with the least money.
5. The product is easy to install and can directly replace the original gear knob. The gear knob has built-in markings, 3, X, and M badges, and the crystal light transmission effect is very good. Full of high-end quality.
6. Regarding tariffs. According to EU policy, for all EU countries, if the order exceeds 150 euros, your country will charge corresponding tariffs. This is EU policy and we cannot decide. It is the buyers obligation to pay import duties, which is the policy of each country.
Applicable Models:
Package List：
1X Crystal Gear Shift
1X Crystal Multimedia Knob
1X Crystal Start Button
1X Crystal Volume Button
LOSSLESS INSTALLATION：
-just remove the corresponding parts of the original car, and reinstall it back on the original road, replace the parer handle for lossless installation.
installation steps：
1. Remove the back cover
2. Remove the cable
3. Remove the T8 screws
4. Install fastening screws
5. Load the handle
6. Insert the cable
7.Close the back cover
8. The installation is complete
After the power is restored after installation, the solution to the problem of Parking assist system
failure is that the system will return to normal after about 10- 15 minutes of normal driving.
1. Loosen the nut.
2 Unplug the negative electrode wire of the vehicle battery from the negative electrode of the battery, place it on one side and fix it.
1. Loosen the nut.
2. Release the battery negative wire of the 12V dual energy storage system from the fi device.
WARNING：
Improper operation will lead to current short-circuit hazard and fire hazard
The battery negative conductors of the 12V battery (position in the car trunk) and auxiliary battery
(dual energy storage model, co-driver side position in the engine) must be unpled from the
battery negative electrode without any contact before installation. After being placed for about 10
minutes, the car will not be installed until the built- in current disappears. Continuous electric
installation will cause the car current short circuit to damage the shift assembly. Refund requests are
also refused for damage caused by improper installation. After purchasing the goods, please
contact us first for installation instructions.