DC 10V-60V 600W DC-DC Non-isolated Boost Converter Adjustable 10A Step Up Constant Current Power Supply Module For Arduino

Descrtion:

Module name:600W boost and constant current module Module properties: non isolated boost module (BOOST) Input voltage: DC10V-60V Input current: 10 (MAX) Static working current: 10mA (12V liters 20V, the output voltage, the more Gao Jing and too current will increase) Output voltage: 12-60V continuously adjustable (Default output 19V shmentIf any other voltage is required, please explain to the cabinet. ) Output current]: 10A MAX more than 6A please strengthen the heat diation (related to the input and output preure difference, the greater the preure difference, the smaller the output current). Constant current range: 0.2-10A Output]: = input voltage *10A, such as: input 12V*10A=120W, input 24V*10A=240W, Enter 36V*10A=1360W, enter 60V*10A=600W, Working temperature: -40~+85 degree (please strengthen heat diation when the ambient temperature is too high) Working frequency: 150KHz Conversion efficiency: 92%-96% (efficiency and input, output voltage, current, preure difference) Input back protection: no (pay attention to negative and negative) Installation way: 43mm screw hole Connection mode: connection output Module size: 85mm x52mm x 21mm 1. Output voltage regulation: 1, adjust the CV-ADJ potentiometer, according to your battery or LED, to set the output voltage to the voltage you need. The clockwise voltage is reduced and the clockwise adjustment is large 1. Output current regulation: 2, clockwise adjustment of the CC-ADJ potentiometer around 20 circles, the output current set to the minimum, then LED, CC-ADJ potentiometer to your required current. For battery charging, the battery is fully discharged, the output received again, adjusting CC-ADJ to the current you need, (for charging for the use of a dead battery transfer is allowed because the battery remaining power increasing, the charging current is small.) Please do not adjust the current by short circuit. The circuit structure of the boost module can not be adjusted by short circuit. Package included: 1 x 600w boost constant current module About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.