DC 12V To AC 220V Car Inverter 300W Power Converter Digital Display 4 USB Fast Charging Socket Adapter Smart Voltage Monitor-1

Descrtion:

Product Name: 300W on-board inverter

Maximum continuous peak power: 300W

Product model: e8982

Switching mode: PWM (pulse width modulation)

Body size: 158 * 100 * 43mm

Output waveform: corrected sine wave

Product weight: 0.347kg

Ambient temperature: 0 ° C ~ 40 ° C

Input voltage: 12V

Storage ambient temperature: - 10 ° C ~ 70 ° C

Applicable input interface: ette / battery clamp

Working / relative humidity: 20% - 90% non condensing

USB output: 5V four port shared 4.1a

Shell material: flame retant ABS material

Output voltage: 220V 50Hz

Cable length: 550mm

Continuous rated power: 150W

Specifications:

characteristic

1. This product is a device that converts DC voltage into AC voltage.

2. Adopting international advanced circuit design: small volume, convenient operation, stable performance and high efficiency are the main advantages.

3. It is suitable for digital products, office appliances, small household appliances, portable electric tools, etc.

4. Low voltage protection.

5. Overvoltage protection.

6. Overload protection.

7. Overheating protection.

8. Short circuit protection.

Operating instructions

Incorrect connection may damage the inverter and electrical appliances. Please connect correctly according to the following proce:

1. When used in the vehicle or the load is le than 200W:

① The red wire of the ette plug is connected to the " " end of the inverter, and the black wire is connected to the "-" end of the inverter. Tighten it gently.

② Insert the plug into the ette socket and turn on the switch. When the green light of the inverter is on, insert the electrical plug into the AC socket of the inverter.

2. When used outside the vehicle or the load exceeds 200W:

① First connect the red battery line to the " " end of the inverter, connect the black battery line to the "-" end of the inverter, then connect the clamp of the red line to the " " end of the battery, and connect the clamp of the black cable to the "-" terminal of the battery.

① Turn on the switch. When the green light of the inverter is on, insert the electrical plug into the AC socket of the inverter.

③ If not used, separate the cable from the battery.

Package Included:

1*Car inverter

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.