DC 3-5V To DC 5V 3A 12V 1A Lithium Battery Step Up Power Module Boost Converter Voltage Regulator Fast Charging Board Stabilizer

Descrtion: 1: Widely used 2: Small size, mini row booster board 3: Simple to use and easy to understand 4: Large area heat diation 5: High safety performance With EN enable terminal, after the R3 on the module is removed, EN is the enable pin, and the logic is high effective (turn on the boost) and low turn off the boost (low power standby, current le than 1uA). The high level cannot exceed 5V, and the low level cannot be lower than -0.2V. Input voltage: DC3-5V Output voltage: 5V/12V selectable Large output current: 5V3.5A, 12V1A (when the heat diation is strengthened, the maximu.5A is measured when 4.2V is input and 5V is output, but it is recommended to be below 3A for long-term work. Please use thick wires for wiring, and it is recommended to use wires not le than 1.5 square) The output end cannot be connected to inductive loads such as motors, motors, fans, etc.; If the output load is frequently started or frequent large current fluctuations, it is recommended to connect a large-capacity electrolytic in parallel at the output pad. When the input terminal is a non-battery power supply, it is recommended to connect a large-capacity electrolytic in parallel at the input terminal. Conversion rate: 95% tyal (related to input and output parameters) Quiescent current is le than 1ma Size: 13*21*4.0mm (length*width*height) Output rple: about 80MV Reminder:

The positive and negative of the power supply input cannot be red, and the wrong connection is directly sped. The main ch is squeamish and afr of static electricity. When , try to connect the iron to the ground reliably. In addition, because the module is small in size, but the current is large, you must use a thick wire when wiring. , The thin electronic wire can't reach it!

Package included: 1* DC 3-5V to DC 5V 3A 12V 1A Lithium Battery Step Up Power Module Boost Converter Voltage Regulator Fast Charging Board Stabilizer

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.