DC 400W 15A Step-down Buck Converter Constant Current Power Supply LED Driver 10.5-60V To 0-45V Voltage Charger Step Down Module

Product selling point

1: There is a constant current indicator when charging the battery. The charging status is clear at a glance.

2: The output power is large, the ventilation is good, and the natural heat diation can achieve 280W/12A (note that there are output power and output current limits).

3: 10-60v wide input voltage, suitable for most power supplies on the market as input source

4: The module adopts a step rectification scheme, which is extremely efficient, and the output voltage is above 10V and the efficiency is as high as 92%-96%.

5: There is input undervoltage protection

Main features of power supply module:

10-60v wide input voltage, suitable for most power supplies on the market as input source.

The output is constant voltage and constant current, and the voltage and current are continuously adjustable. Can meet most of the electrical equment.

Large output power, good ventilation, natural heat diation can achieve 280W/12A (note that there are output power and output current limits).

The module adopts the step rectification scheme, which has extremely high efficiency, and the output voltage is above 10V and the efficiency is as high as 92%-96%.

There is a constant current indicator when charging the battery. The charging status is clear at a glance.

The input has a 15A fuse, and the positive and negative poles of the input will not damage the power supply (the fuse will be burned, and the fuse needs to be replaced)

Module parameters

Module name: 400w step-down constant voltage and constant current

Module nature: non-isolated step-down module (BUCK)

Input voltage: 10.5-60V

Output voltage range: 0-45V (must meet the step-down condition, IN input is multlied by 0.8)

Minimum output voltage: 0V (+1V)

The highest output voltage: approximately equal to the input *0.8 (for example, the input is 40V, 40V*0.8=32V, the highest output voltage is 32V, which will actually be a little higher and reach about 34V.35)

Output constant current: 0.2-15A (continuously adjustable, heat diation should be strengthened if it exceeds 12A)

Maximum output power: 400W (a fan needs to be added for forced cooling of the heat sink and magnetic ring)

Continuous maximum working power: 280W (under ventilated environment)

Continuous maximum working current: 12A (under ventilated environment)

Input under-voltage protection: Yes, (input is lower than 10.5V to turn off the output, there is an error of about 0.5V)

Input overvoltage protection: none (overvoltage is prohibited)

Working temperature: -10~+85 degrees (enhance heat diation when it exceeds 65 degrees)

Working frequency: 100KHz

Conversion efficiency: up to 97% (efficiency is related to input, output voltage, current, and preure difference)

Short circuit protection: Yes (constant current protection)

Input re connection protection: Yes (please be careful when short-circuiting the input and the input re connection will burn the input fuse)

Output anti-recharge: none (to charge the battery, output connect inductive load, for example, anti-re diode must be added to the motor)

Work indicator: Yes (blue LED light)

Constant current indicator light: Yes (the CC indicator red light on the small board lights up when the constant current is working, there is no current output, and the light does not light up when the voltage is constant)

Connection method: Comes with welding-free 25A terminal block

Module size: length 60 width 60mm high 45mm

Net weight: 170 grams. 180 grams with pack.

Packing method: independent carton pack.

Wiring: "Input/IN" is input. "Output/OUT" is output (marked in Chinese)

Precautions:

It is strictly forbidden to connect the positive and negative poles of the input and output in re (re input will burn the fuse, and the re connection of output will damage the control board. The damage of the small board cannot be repaired and can only be replaced.

The control panel is a little rainproof glue, if it is damaged, it can only be replaced. Mind shooting carefully

To charge the battery, when the output is connected to an inductive load, the output should be equped with an anti-reflow diode

Checklist

1*power module

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.