DC-DC 12-70V 24V 48V 8A Constant Current Charging Automatic Step Up/Down Regulator 30W 180W High Power Car Solar Power Module

DC-DC 12-70V 24V 48V 8A Constant Current Charging Automatic Step Up/Down Regulator 30W 180W High Power Car Solar Power Module

• I am an international seller

Our shop sells the most popular 3C consumer electronics products,such as mobile phone accessories,computer accessories,game peripherals,smart wearables,and follow the most popular fashion trends. If you like our products,please follow us,become our follower and fan.We will provide you with the most popular products to satisfy your fashion shopping experience.Package : SOPis_customized : YesModel Number : Solar Power ModuleOperating Temperature : 1Dissipation Power : 1Supply Voltage : 12-70V2.5-58VCondition : NewType : Voltage RegulatorBrand Name : diymoreOrigin : Mainland ChinaDC-DC 12-70V 24V 48V 8A Constant Current Charging Automatic Step Up/Down Regulator 30W 180W High Power Car Solar Power ModuleDescripiton:Module nature: non-isolated voltage regulatorInput voltage: 10.5-70VDC Please derate when the power supply voltage is lower than 12VInput current: 10A max, long time 8A maxOutput voltage: 5-58VDCApplications where the adaptive input voltage is higher or lower than the set output voltageOutput current: 8A max, long time 6A max, do not allow the input and output current to work at the maximum value, and the sum of input and output currents cannot exceed 12AConstant current adjustable: 0.5-8AOutput power: 180W max when working at low voltage, the maximum current is 8A, the bare board has no auxiliary heat dissipation, the maximum output is 30W, with a heat sink and no fan, the maximum output is 50W, when the module temperature exceeds 65 degrees, heat dissipation needs to be strengthenedStandby current: about 20maConversion efficiency: about 90%Input anti-reverse connection: None, please confirm the positive and negative before powering onDimensions: 70*52*21MM (bare board)70*52*46MM (with heat sink and fan)Weight: about 70g bare board, about 120g with heat sink, about 135g with heat sink, fanFeatures:Use high thermal conductivity aluminum substrate to adjust the meter, convenient for external radiatorInput ultra-wide range, capable of boosting, stepping down, and stabilizingAchieve 0 input and output voltage difference, adjustable output voltageOutput voltage/current adjustment method:1. Adjust the constant voltage adjustable potentiometer (decrease the voltage clockwise, increase the voltage counterclockwise), according to your load requirements, set the output voltage to the voltage value you need. For example, the voltage of 10 LED strings is adjusted to 37V.2. Adjust the constant current adjustable potentiometer clockwise about 20 turns, set the output current to the minimum, connect the LED, and adjust the constant current adjustable potentiometer to the current you need. For battery charging, after the battery is discharged, connect to the output and adjust to the current you need. (When used for charging, you must use the discharged battery to adjust it, because the more the battery is left , The smaller the charging current.)Please do not adjust the current in a short-circuit mode. The circuit structure of this buck-boost module cannot be adjusted in a short-circuit mode.