DC12 24V 36V 48V XH-M603 Lithium Battery Charge Controller Protection Board Auto Charging/Cycle Charge/Charge NC Switch Relay-10A DC 6-60V

DC12 24V 36V 48V XH-M603 Lithium Battery Charge Controller Protection Board Auto Charging/Cycle Charge/Charge NC Switch Relay

Specification:

Name: Battery charging NC switch

Control voltage: DC 6-60V

Control current: 10A/30A (maximum)

Control accuracy: 0.1V

Display accuracy: +/- 0.1V

Voltage percentage calculation: battery voltage/(upper limit voltage-lower limit voltage)

Output type: direct output, output voltage/current=input voltage/current

Control type: voltage control, relay control switch, support charging while using

Applicable to: all kinds of batteries, lithium batteries, etc.

Parameter settings:

1. Long pre the SET on to enter the setting.

2. Short pre the SET key to switch the setting parameters.

3. Pre UP/DOWN to adjust the parameters, support short pre and long pre (rapid increase or decrease).

4. Long pre the SET on to exit the setting.

Descrtion of key functions of running interface:

1. Short pre SET to display the currently set parameters.

2. Short pre UP to switch to display the charging percentage and time.

3. Short pre DOWN to turn on/off the relay enable; if it is off, a shutdown reminder will be displayed.

4. Long pre UP to turn on/off the LCD backlight sleep state (L-P), OFF: constant, ON: automatically extinguished after 5-10 minutes.

Intelligent charging time recording function:

If the charging time control is not turned on, the product will record the time to fully charge. When entering the time display interface, the charging time fes to display; when exiting or the next charging is turned on, it is empty (relay is on).

Serial UART data upload and parameter setting function (TTL level): Please check the product display ture for detailed operation instructions.

Notes:

1. Generally, the charging current is about one-tenth of the battery capacity. Please control the current to avoid damage.

2. This module is only used as a control switch module and cannot adjust voltage and current.

Packing list:

1*Lithium battery charge control protection board 6-60V

XH-M603

Specification:

Input voltage: DC 10-30V

Display accuracy: 0.1v

Control accuracy: 0.1v

Output type: direct output

Voltage error: ±-0.1V

Range of use: 12-24V various storage batteries

Size: 82×58×18mm

Instructions:

1. Set the starting voltage: in the normal display voltage state, preing the on will display the starting charging voltage; long pre for 3 seconds, the digital tube will f; you can start or stop the on to set the starting charging voltage value.

2. Set the shutdown voltage: in the normal display voltage state, pre the on to display the charging voltage; pre and hold the on for 3 seconds, the digital tube will f; you can start or stop the on to set the charging voltage value.

3. Factory reset: When the start/stop on is preed in the power-on state, the digital tube will display 888; it means the factory reset setting.

Packing list:

1*XH-M603 Lithium battery charge control protection board 12V-24V

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.