DC12V Brushless Water Pumps 1/2in Male Thread Centrifugal Submersible Pumps for Fountain Pond Aquarium New NO5280

Features:

1. Circulation pumps is non-self-priming pumps. This pumps is centrifugal pumps, it can't vent the air automatically, so it must be operated by submersible installation.

2. Max flow rate: 800L/H(210GPH); Max lift height: 4m (13ft); Working temperature: 0C - 60C/(32F - 140F).

3. The outlet of the pumps is 1/2in male thread, easily connect with a hose, detachable and cleanable. No need any tools.

4. Submersible installation and entirely waterproof, the point straight in line with the pumps body is the water inlet, vertical to the pumps body is water outlet.

5. Super long working life, small, high efficiency, low consumption, low noise (less than 35db). Fit for fountain, pool, pet aquarium, fish tank, solar circulation system, water circulation system, hydroponic systems, etc.

Notice:

1. Working at rated voltage (DC12V/1.5A ). The positive pole is red

wire, the negatives pole is black wire. Excessive voltage and current

will affect the life of the pumps.

2. This pumps is centrifugal pumps, it can't vent the air automatically, so it must be operated by submersible installation.

3. Preventing any hard particles entering the pumps.

4. When blocking, long-running is not allowed.

5. Actual color may be slightly different from the image due to different monitor and light effect. Please allow 1-3cm deviation due to manual measurement.

Specification:

Material: ABS

Power consumption: 19w

Working voltage: DC12V

Rated current: 1.5V

Maximum flow: 800L/H (210GPH)

Maximum lifting height: 4 meters (13 feet)

Entrance diameter: 0.5 inches

Outlet diameter: 0.5 inches

Noise: