DDR4 DDR3 DDR2 Ram Boot Memory Test Tools Card AMT128 -E Professional Analyzer Repair Memory MODULE Maintenance

Introduction and instructions for AMT64/AMT128 test card

Product name: Multi-core Mbits Advanced Modulo TEST E version

Features:

1.Support multle simultaneous testing of double-sided modules,

2.It supports simultaneous parallel testing of multi-core CPUs, with fast testing speed and high detection rate.

3.Display the frequency and timing of the DRAM module to avoid wrong test conditions;

4.DDR2 memory test chset motherboard, supporting intel P35 641 P45 X48 chset motherboard;

5.DDR3 memory test supports intel P55 X58 H61 Z68 B75 Z77 H81 b85 Z87 Z97 chset motherboard AMD AM3 AM3+ FM1 FM2 motherboard;

6.DDR4 memory test supports intel X99 Z170 B150 H110 chset motherboard.

Details:

1.Support multi-core parallel test, short test time and best test quality;

2.When multle double-sided modules are tested at the same time, the position of the actual error particle is displayed to improve maintenance efficiency;

3.Display the frequency and timing of DRAM module to avoid wrong test conditions;

4.Support INTEL's latest DDR4 X99/Z170 chset;

5.Support ddR4/DDR3 memory module test;

6.All major memory module manufacturers in Taiwan are using it. Customers are welcome to buy;

7.It is recommended to use the motherboard Gigabyte/ Gigabyte GA-Z170-HD3 with 6100 CPU

Chset support list:

Manufacturer

Chset

Maximum number of modules

Test limit

INTEL

P35/x48/p45/g41/p55

Z68/z77/z86/z97/z170

4

Memory modules with the same capacity, 1 module/2 modules/4 modules can be tested, 3 modules cannot be inserted for testing

INTEL

X58

6

INTEL

X99

8

Must be the same capacity

1 test/2 test/4/6/8 test, 3/5/7 test cannot be inserted

AMD

AM3/AM3P/FM2

4

The memory must have the same capacity, 1/2/4 test, not 3 test

Suitable:

1.Self-employed individuals, boes and hardware maintenance enthusiasts engaged in memory proceing, memory wholesale, memory repair and DIY computer aembly.

2.Profeional workshops or private enterprises engaged in memory recovery, re- and shment.

3.Training institutions or schools for hardware maintenance.

Unique Features:

1,E version adopts E interface, plug-and-play for new motherboards without PC slot, no adapter card is needed, and it can be plugged into E graphics card slot. (No The new motherboards with slots like H61 and H81 are plug-and-play. Old motherboards are plug-and-play as long as they have a E interface, just plug in the E graphics card slot.)

2,the detection time is fast, the detected memory quality is good, the stability is high, and the compatibility is high.

3,support the simultaneous detection of multle double-sided memory, so that you can test the quality of the memory ch on each slot at the same time, and accurately locate the quality of a specific ch.It is very convenient for factory-level ma memory testing.

4.The location of the bad bit particles is accurately distinguished, and the specific location of the double-sided memory bad ch is distinguished, that is, the front and back sides of the memory are distinguished;

5,the can automatically recognize and judge the specification memory of 4, 8, 16 bit chs,

6.This card is a e version and does not have a motherboard code running function. As for why, experts know why, except for Gigabyte motherboards without slots that support E Code running, other motherboards do not support E code running. You need to indicate which item of the test item runs to and you can plug in a card supported by the motherboard.

7.This card supports server memory test for server platform version, please see the figure below for details;

8.With test status indicator light You can know the memory detection status without a display The green light fl when the test is running: the green light is always on when the test paes, and the orange light is always on when the test fails. When the orange light is on, connect the display to view the location of the bad particles.

Installation method:

After your motherboard, CPU and memory are ready, insert our memory test card into the hardware installation to complete;

Perform startup test:

If you cannot enter the following test interface after booting, restart the computer; enter the BIOS settings, find and find the network startup or PXE boot, save and restart, enter the BIOS settings again, and set AMT64E as the first boot.

Test option settings:

During the test, pre the S key on the keyboard to enter the test option setting interface. Using the PS2 interface keyboard will have more compatibility. After preing the S key, the pop-up setting interface will have a certain delay depending on the current test item. Pre Please wait for a while after preing the S on, the setting interface will pop up automatically after completing the current test it.

Test it:

Known iues:

Due to the algorithm limitation, the test item "TEST05" may have the phenomenon of repeated bad particle positions. For example, if slot 1, the front side BYTE1 is a bad particle, the front/rear side of slot 2/3/4 may also display false falsehoods. In this case, this test item can be temporarily closed, and the results of other itwill be used for another judgment.

Memory particle location map:

Please insert the memory module into the motherboard to identify the corresponding error particles in the following figure;

Memory single and double sided definition:

In the figure, each small red square represents a memory particle that encloses a part of the square. A memory can hold two modules, and the data bit of each horizontal group is 64 bits; it is calculated by the number of particles , To form a module, 8-bit particles require 8 particles, 16-bit particles only need 4 particles and 4-bit particles require 6 particles.

A memory module with only one module is called a single-sided and two modules is a double-sided module. For a memory module composed of 8-bit particles, we call it a compatible module. A compatible module with only one module uses 8 8-bit particles. When wiring, 8 particles are just placed on one side, while the memory sticks of two modules have 8 particles on both sides. The simple understanding is that the memory sticks with particles on one side are single noodles, and the ones with particles on both sides are Double-sided str. This is the source of the single-sided and double-sided strs. Our maintenance personnel can’t understand it so simply. We divide the single-sided and double-sided strs according to the fact that one memory stick is composed of two modules. The same applies to PC computers. This is how memory is used. So we can't just look at the particles of the memory stick to determine whether it is a single-noodle or double-sided one. For example, a memory stick composed of 4 particles, because a module requires 16 particles, and a normal size memory stick One side of the can’t hold 16 particles at all, so when the is routed, 8 particles are placed on one side. This kind of memory stick looks like a double-sided str because there are particles on both sides, but it is a single-sided str. There is also a larger with a mold on each side. A group of 16 particles is a real double-sided str composed of 4-bit particles. (Because the memory module composed of 4-bit particles was previously only supported by some AMD CPUs, it is called AMD dedicated strs, but now Intel Core 8th generation CPUs are compatible H110 motherboards capable of DDR3 memory can also use this 4-bit memory module)

There is also a kind of twin crystal particles that are not shown in the above figure. This kind of particles eentially encapsulates two particles into an IC. The memory stick composed of this kind of particles is the same as the memory stick composed of 16-bit particles, forming one The module also only requires 4 ICs.

Test chart of different platforms:

About shping
Shping and Pack All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.