Dial 2 IN 1 52mm with Alarm 0-190 Water Level Meter+Sewage Level Meter for Water Sewage Level r Car Boat 12V24V

Support Customized and Dropshipping

2022 New 52mm Universal 2 in 1 Dual

Application: Marine Boats/Truck/Bus/Motor Home/Hot Rod/

About the :

The device works, with a little delay (about 20-80 seconds) of changes in the readings. Apparently, it is done in order not to react to the sp of water in the tank.

Connection:

blaline connect to the negative line,red line connect to the positive line,green line connect to the water level r signal line,white line connect to the sewage level r signal line,yellow line is exchange on line

Feature:

- 52mm diameter Two in One show with easy - Programmable Input Resistance Signal to adapt different /water/temperature r0-190Ω, 0-180Ω, 10-180Ω, 240-33Ω, 240-30Ω- High Resolution View under sunshine- Diameter: 52mm (2inch)- Re polarity protection and anti-foing performance- Working Voltage:12V/24V- Working temperatures: - 40 to 85°C- IP66 Waterproof- Water level alarm set: le than 20%- Sewage level alarm set: more than 80%

GUIDE

1. Cut an Φ52mm (2-1/16") hole in the panel (II) allow a clearance of 55mm (2 3/16”). behind the panel.2. Remove fastening ring (I), insert from front. Tighten (III) using fastening ring ( I)3. Connect cables according to the diagram/label.

Setting Menu：“Unit” “R 1” “R 2”

1.Hold & Pre the on, Power On , the LED screen will show Switch ShowUnit, R1, R22.Unit , Water Level, Sewage Level: %Water temperature: ℃ or ℉3.R1---Configure Top Row Signal RangePre on to switch 000 ~006For example, LED will show 001, which means 0~180, then release the on and wait dial f to complete to save setting

4.R2---Configure Top Row Signal RangePre on to switch 000 ~006.For example, LED will show “002” , which means 10~180, then release the on and wait dial f to complete to save setting

Package:

1PCS +Manual+Cable

r Feature:

- Material: 304 Stainle Steel-Aembly: 5 holes-Mounting: 5 pieces of M5 screws and 2 mm thiket-Operating temperatures: - 40 to 85 degree-Protection rank: IP67-Level r Support : Water Level -Signal: 0-190 -Resolution ratio: 21mm- Fitment: for oline, , methanol , ethanol - When the oil / water level is empty , there will be a space of 3-21mm between the r float and the bottom of the r. This is a safe distance, and the r can work normally,Thank you~

r Connection:

- Brown line Connect to the Signal Output- Blue line Connect to the Negative(-)

Package:

1 PCS r(not included )